Buscar
Mostrando ítems 81-90 de 183
Synthesis and graphitization of phenolic resins for carbon-containing refractory applications
(Universidade Federal de São Carlos, 2020-02-03)
Carbon-containing refractories’ (CCRs) present special chemical and thermomechanical properties, which depend on the presence of carbonaceous phase with a structure similar to those of graphite. However, phenolic resins ...
Fadiga de aços TWIP de baixa densidade produzidos por conformação por spray e forjamento rotativo.
(Universidade Federal de São Carlos, 2020-02-19)
The present study evaluated the mechanical properties in monotonic and
cyclic stress of two low-density steel designed by thermodynamic calculations
aiming stacking fault energy values that would allow different plasticity ...
Formação de hexaluminato de cálcio in situ em refratários macroporosos: caminhos para o desenvolvimento de isolantes térmicos mais eficientes e ecológicos
(Universidade Federal de São Carlos, 2020-07-28)
Macroporous thermal insulators have recently emerged industrial interest due to their low thermal conductivity and toxicity compared to fiber-based insulators. Nonetheless, some challenges need to be overcome to enable a ...
Desenvolvimento de biocompósitos de Poli (ácido láctico)/biocargas para impressão 3d de scaffolds para engenharia de tecidos ósseos
(Universidade Federal de São Carlos, 2020-08-11)
As life expectancy increases worldwide, there is an increased need for orthopedic procedures to repair bone defects resulting from trauma. In this context, new surgical procedures and bone repair materials, such as scaffolds ...
Efeito do revenimento sobre a resistência à corrosão do aço inoxidável uns s41426
(Universidade Federal de São Carlos, 2020-02-28)
Supermartensitic stainless steels were developed during the 1990s as an alternative to duplex stainless steels for manufacture of oil country tubular goods. As a result of microstructural variations caused during tempering ...
Obtenção de mantas de poli (ácido lático) por fiação por sopro em solução e sua caracterização para uso em sistemas de microfiltração
(Universidade Federal de São Carlos, 2020-05-27)
In order to remediate the difficulty of access to safe drinking water by 1/3 of the world population and the need to use new processes for obtaining materials, membranes produced by solution blow spinning (SBS) have a great ...
Estudo da viabilidade de formação de nitreto de boro em aços inoxidáveis ferríticos
(Universidade Federal de São Carlos, 2020-03-02)
Since the 90s, the petroleum industry has been conducting research on alloys that are wear and corrosion resistant once several equipment parts used in the oil exploitation, extraction and production, such as pipes, joints, ...
Biomimetism of Brazil nutshell (Bertholletia excelsa)
(Universidade Federal de São Carlos, 2020-08-07)
For thousands of years, nature has accumulated countless possibilities for optimized
solutions to engineering problems using limited raw material, room temperature,
aqueous solutions, solar energy and renewable resources. ...
Caracterização microestrutural e mecânica da liga Ti-35Nb-7Zr-5Ta produzida por fusão seletiva à laser
(Universidade Federal de São Carlos, 2020-08-10)
Selective Laser Melting (SLM) is an additive manufacturing technique that
consists of a layer-by-layer fusion of a powder bed by scanning a laser enabling
the production of full density parts accordingly to a 3D CAD model ...
Manufatura aditiva da liga reciclada Al-Fe-Cr-Ti formadora de fase quasicristalina
(Universidade Federal de São Carlos, 2020-02-27)
The precipitation of quasicrystalline phase in an α-Al dendritic matrix provides Al-based alloys with high mechanical and wear resistance, mainly at high temperatures, which are promising for applications as automotive and ...