Buscar
Mostrando ítems 61-70 de 85
Avaliação da anomalia da teoria de nucleação clássica em vidros silicatos
(Universidade Federal de São Carlos, 2021-07-13)
Under some conditions, the Classical Nucleation Theory (CNT) provides a good description of the temperature dependence of the experimental homogeneous nucleation rates in supercooled liquids. Allegedly, however, it strongly ...
Coatings cerâmicos de alta emissividade como soluções energéticas para fornos industriais
(Universidade Federal de São Carlos, 2021-08-30)
Aiming at alternatives to reduce the impacts from the excessive consumption of non-renewable energy sources by the industrial sector, the present work highlights an important technological aspect with the development of ...
Método de controle de trajetória de atuadores ipmc baseados em nafion® utilizando técnica de visão de máquina em ambiente com umidade relativa controlada
(Universidade Federal de São Carlos, 2021-08-13)
Ionomeric polymer-metal composites (IPMC) consist of an electroactive polymeric matrix coated on both sides with a noble metal. When applying an electrical potential difference, the polymeric membrane changes its thickness, ...
Preparation and characterization of bionanocomposites based on protein and cellulose nanocrystals by continuous casting
(Universidade Federal de São Carlos, 2020-12-11)
This Ph.D. thesis covers the production and characterization of gelatin-cellulose nanocrystals (CNCs) bionanocomposite films intended for multifunctional food packaging. The up-scalability of the gelatin/CNCs films was ...
Desenvolvimento de ligas de alumínio recicladas contendo a fase primária Al(Fe,TM)Si aproximante de quasicristal: controle da microestrutura visando aplicações tribológicas e mecânicas
(Universidade Federal de São Carlos, 2021-01-19)
Iron is the most common and harmful impurity to the mechanical properties of casting Al-7Si-3Cu alloys, which are widely used in the automotive industry. Due to the economic and environmental advantages of recycling, there ...
Influência de modificações superficiais na resistência à corrosão e na bioatividade da liga beta ti-40nb para aplicações biomédicas
(Universidade Federal de São Carlos, 2021-07-30)
β-titanium (Ti) alloys have great applicability in the biomedical area due to
properties such as low density, high corrosion resistance, low elasticity modulus
(E), and biocompatibility. However, these alloys are not ...
Influência dos contornos de grãos nas propriedades elétricas de hematita policristalina modificada com diferentes elementos químicos
(Universidade Federal de São Carlos, 2020-03-13)
The use of molecular hydrogen produced by photoelectrochemical cells is an alternative to fossil fuels, economically and environmentally. Hematite (α-Fe2O3) is a promising candidate to the realization of photoelectrochemical ...
On-line FTIR spectroscopy system for extrusion-based process analysis
(Universidade Federal de São Carlos, 2021-11-11)
Polymer processing is a fundamental key to achieve the desired properties to reach the needs of polymer applications. Thus, it is important to understand how the processing can contribute to material characteristics during ...
Efeito do tamanho e distribuição de tamanho inicial das partículas da hematita, na cinética de sinterização assistida por micro-ondas
(Universidade Federal de São Carlos, 2021-11-26)
This thesis aimed to study the effect of the initial particle size and its
distribution of hematite on microwave-assisted sintering kinetics. Two synthesis
methods were used: sol-gel and seeded-mediated growth. By sol-gel ...
Solidificação, desenvolvimento microestrutural, propriedades mecânicas, elétricas e de corrosão de ligas Al-Si(-Ag)
(Universidade Federal de São Carlos, 2021-10-27)
In the last years, the development of new light and efficient systems in electric vehicles (EV) opens up new research opportunities. Besides that, the need for internal combustion engine components with optimized properties ...