Buscar
Itens para a visualização no momento 121-130 of 158
Dispersão da lignina Kraft em PBSA e suas interações: efeito da concentração e condições de processamento
(Universidade Federal de São Carlos, 2020-10-29)
Serious environmental issues have been caused by the massive consumption of plastic products. One of many strategies to reduce the environmental impacts is the development of bio-based and biodegradable polymeric materials. ...
Estudo termodinâmico, microrreológico e de propriedades mecânicas de blendas poliméricas ternárias com matriz de PCL
(Universidade Federal de São Carlos, 2020-08-31)
There is a demand for high quality materials that meet specific needs such as comfort, low cost and direct skin molding for making orthoses. This work aimed develop and identify some mechanical properties and the microrheology ...
Comportamento de fluência e tração a quente do aço inoxidável austenítico AISI 201LN
(Universidade Federal de São Carlos, 2020-09-21)
Among the different stainless steel (SS) series, the 200 series, also known as Cr-Ni-Mn alloys, has recently been gaining prominence worldwide. In spite of that, studies addressing the high-temperature deformation these ...
Avaliação da integridade superficial de insertos retificados da liga WC-Co para ferramentas de corte
(Universidade Federal de São Carlos, 2021-05-11)
Cutting tools produced from cobalt tungsten carbide alloy (WC-Co),
compared to conventional cutting tools, provide lower cost of machining, with
increasing productivity and acceptable combination of hardness and ...
Efeito da adição de Al e C na evolução microestrutural e no comportamento mecânico de aços austeníticos de baixa densidade com alto teor de Mn
(Universidade Federal de São Carlos, 2021-05-20)
Low-density steels are advanced materials that are being developed mainly for the automotive industry to reduce the structural weight of cars. The most common studied compositions comprise FeMnAlC variations, in which both ...
Produção de recobrimentos resistentes ao desgaste através de laser cladding de pós das ligas amorfizáveis fe-co-nb-b-(y)
(Universidade Federal de São Carlos, 2020-07-28)
Industrial components can be subjected to a high level of surface wear it
necessary to search for new wear-resistant alloys to improve the performance
and safety of the components. The objective of this work was to produce ...
Efeito da microadição de oxigênio na estabilidade microestrutural da liga Ti-29Nb-13Ta-4,6Zr processada via deformação plástica severa e envelhecimento
(Universidade Federal de São Carlos, 2021-02-24)
Gum Metal corresponds to a family of β-Ti alloys that are currently receiving great attention due to its outstanding properties such as low elastic modulus, superelasticity, and high tensile strength. These alloys show ...
Avaliação das microestruturas de solidificação e propriedades de aplicação de ligas monotéticas Al-Bi, Al-Bi-Cu e Al-Bi-Zn
(Universidade Federal de São Carlos, 2021-06-16)
Monotectic Al-based ternary alloys can result in a good combination of wear resistance and mechanical strength. While the soft self-lubricating elements contribute to an appropriate wear resistance, modification with third ...
Caracterização eletroquímica do eletrólito sólido NASICON Li1,5Al0,5Ge1,5(PO4)3 (LAGP)
(Universidade Federal de São Carlos, 2021-08-17)
Solutions to the environmental and social challenges of postmodern society converge on a common point: sustainability. Doing more with less and using environmentally friendly materials is imperative. Energy storage is ...
Estudo do comportamento mecânico das ligas de titânio beta metaestável TMZF e Ti15%Mo durante processamento termomecânico
(Universidade Federal de São Carlos, 2020-10-02)
Stress-strain curves of two metastable beta titanium alloys, the Ti-15%Mo alloy and the TMZF alloy were evaluated. The curves were obtained from isothermal hot compression tests in a temperature range from 650 to 900 ° C, ...