Buscar
Itens para a visualização no momento 11-20 of 43
Caracterização microestrutural e propriedades de desgaste de revestimento de aço inoxidável supermartensítico modificado com boro processado por HVOF
(Universidade Federal de São Carlos, 2019-05-28)
Stainless steels are recognized as good materials to be used in corrosive environments, but their wear resistance does not exhibit good results. Therefore, researches have been developed to increase the wear resistance of ...
Desenvolvimento de nanocompósitos de amido/palygorskita modificada com íons de prata via casting contínuo
(Universidade Federal de São Carlos, 2019-02-27)
The food industry has invested cheap and efficient technologies capable of providing fresh and additive-free food products. One of the possible solutions is the use of antimicrobial active packaging that ensures the ...
Microestrutura, resistência mecânica e corrosão sob tensão em ligas de alumínio Al-0,3%Fe e Al-4%Cu processadas por extrusão em canal angular
(Universidade Federal de São Carlos, 2019-04-29)
Grain refinement is an important hardening mechanism in metallic alloys, notably when the grain size reaches the submicrometer scale. For this purpose, several techniques of Severe Plastic Deformation (SPD) have been ...
Modelagem computacional e análise das propriedades termodinâmicas do líquido super-resfriado do sistema Fe-Nb-B
(Universidade Federal de São Carlos, 2019-04-22)
Amorphous alloys of the Fe-Cr-Nb-B system are promising materials to supply the demand for new pipe coatings of higher wear resistance in the petrochemical industry due to its good abrasion and corrosion resistance properties. ...
Implementação do sistema de cristalização superficial induzida por laser em vidro de composição eutética
(Universidade Federal de São Carlos, 2019-03-01)
The radiation from lasers has been successfully applied to materials
processing such as drilling, cutting and welding, sintering of ceramic oxides,
surface heat treatment, directional solidification of single crystal ...
Análise da microestrutura, parâmetros térmicos e de propriedades mecânicas na solidificação de ligas com alto teor de cobre Al-(x)%Cu-7%Si
(Universidade Federal de São Carlos, 2019-02-26)
Ternary Al-15%Cu-7%Si and Al-22%Cu-7%Si alloys specimens were obtained by transient directional solidification (DS). This technique is able to provide a very large range of cooling rates and microstructures to be correlated ...
Aprimoramento de um detector de espalhamento de luz laser em baixo ângulo e seu uso in-line na caracterização morfológica de misturas poliméricas bifásicas
(Universidade Federal de São Carlos, 2019-02-27)
A new prototype of the optical detector based on low angle laser light scattering (LALLS) was developed in order to follow in-line the morphology of polymer blends and composites during processing. For this, light from a ...
Sinterização diferencial e auto-tensionamento: efeitos na condutividade elétrica da Zircônia estabilizada com Ítria
(Universidade Federal de São Carlos, 2019-06-19)
Recent researches indicate the possibility of increasing Yttria Stabilized
Zirconia (YSZ) electrical conductivity by generating stress states in the material,
by applying external loads or by its insertion in multilayer ...
Avaliação do efeito de agentes hidrofugantes nas características de telhas onduladas de fibrocimento sem amianto
(Universidade Federal de São Carlos, 2019-07-22)
The fiber cement is a material of great applicability in the branch of the civil construction, due to its characteristics, versatility and low cost, that makes it an accessible element. Fiber cement corrugated tiles are ...
Identificação dos parâmetros do modelo de Drucker-Prager/CAP para estudo da densificação mecânica de alumina atomizada
(Universidade Federal de São Carlos, 2019-06-27)
Pressing followed by sintering is among the most versatile materials processing
routes and suits different classes of materials: ceramic, polymeric and metallic.
In the last decade, this processing route has been gaining ...