Search
Now showing items 1-10 of 25
Caracterização de interfaces para aplicações em ultra-alto vácuo através de brasagem dissimilar entre nitreto de boro hexagonal (h-BN), a liga de adição Ag-Cu-Ti e o Mo metálico
(Universidade Federal de São Carlos, 2020-08-14)
This work aimed to evaluate the vacuum brazing of h-BN/Mo systems for fabrication of the BPM (Beam Position Monitor) in synchrotron radiation beam. The h-BN has low surface wettability and is difficult to weld. The materials ...
Synthesis and characterization of CH3NH3SnI3, Mn doped CH3NH3SnI3 and oxygen-deficient TiO2 as visible-light active semiconductors
(Universidade Federal de São Carlos, 2020-02-14)
CH3NH3SnI3 is an environmentally-friendly (lead-free) perovskite whose synthesis depends on SnI2. Some disadvantages of SnI2 include high cost and tin(IV) contamination. Thus, SnSO4 and C16H30O4Sn are presented as cheaper ...
Monitoramento in/on-line da malaxagem na extrusão: hidrólise e extensão de cadeia do poli(tereftalato de etileno) e fusão do polipropileno
(Universidade Federal de São Carlos, 2020-08-14)
During twin-screw extrusion, understanding and quantifying the behaviour of molten polymers under different conditions is limited by the complex configuration of the equipment. Due to this fact, real-time extrusion monitoring ...
Estudo de Ligas Fe-Nb-B Nanocristalinas Eutéticas Ultrafinas e Laser Cladding de Pós Atomizados
(Universidade Federal de São Carlos, 2020-05-20)
Fe-Nb-B alloys have gained much attention in recent years because of the possibility to obtain different constituents in nanostructured composites, amorphous and ultrafine eutectics (scale of 100 nm to 1 μm) alloys depending ...
Influência da adição de cério na microestrutura e comportamento de oxidação de aços inoxidáveis Fe-Mn-Si-Cr-Ni com efeito de memória de forma
(Universidade Federal de São Carlos, 2020-01-15)
In this study, the influence of small cerium additions on the microstructure and
oxidation behavior of Fe-Mn-Si-Cr-Ni shape memory stainless steels (SMSSs)
was investigated. The results show that the Ce addition in the ...
Estabilidade e habilidade de formação de vidros óxidos
(Universidade Federal de São Carlos, 2020-03-02)
The glass-forming ability (GFA) is a measure of the easiness of vitrification of a liquid during cooling from the liquidus temperature. The GFA is inversely proportional to the critical cooling rate (Rc), whose determination ...
Synthesis and graphitization of phenolic resins for carbon-containing refractory applications
(Universidade Federal de São Carlos, 2020-02-03)
Carbon-containing refractories’ (CCRs) present special chemical and thermomechanical properties, which depend on the presence of carbonaceous phase with a structure similar to those of graphite. However, phenolic resins ...
Desenvolvimento de biocompósitos de Poli (ácido láctico)/biocargas para impressão 3d de scaffolds para engenharia de tecidos ósseos
(Universidade Federal de São Carlos, 2020-08-11)
As life expectancy increases worldwide, there is an increased need for orthopedic procedures to repair bone defects resulting from trauma. In this context, new surgical procedures and bone repair materials, such as scaffolds ...
Biomimetism of Brazil nutshell (Bertholletia excelsa)
(Universidade Federal de São Carlos, 2020-08-07)
For thousands of years, nature has accumulated countless possibilities for optimized
solutions to engineering problems using limited raw material, room temperature,
aqueous solutions, solar energy and renewable resources. ...
Otimização da condutividade iônica de vitrocerâmicas condutoras por íon sódio: controle microestrutural e busca de novas composições
(Universidade Federal de São Carlos, 2020-04-03)
Sodium-based materials are promising candidates for manufacturing stationary storage devices such as batteries due to their low cost and the Na high redox potential. However, the corrosion, flammability, and the degradation ...