Buscar
Itens para a visualização no momento 31-40 of 42
Otimização das propriedades mecânicas da liga de alumínio 319 contaminada com ferro
(Universidade Federal de São Carlos, 2019-02-15)
The influence of iron additions (0.6, 0.8, 1.2 and 1.5 wt.%) and heat treatment on the microstructure and tensile properties of the 319-aluminum alloy processed by spray forming and rotary swaging was investigated. The ...
Mechanical properties and metallurgical characterization of AA6082-T6 alloy welded by refill friction stir spot welding
(Universidade Federal de São Carlos, 2019-07-30)
The efforts to produce automobiles with intense use of aluminum alloys is growing and the 6XXX series of aluminum alloys are important for this scenario. However, the current joining technologies applied in these alloys ...
Equilíbrio de fases e propriedades mecânicas da liga de elemento multiprincipal Cr40Co40Ni20
(Universidade Federal de São Carlos, 2021-02-19)
In the pursuit for materials with improved performance, multi-principal element alloys (MPEAs) attract the interest of the scientific community, due to their large composition space. Some Cr-Co-Ni alloys stand out with ...
Refill friction stir spot welding of different thickness Al-Cu alloy using a tool with reduced dimensions for aerospace application
(Universidade Federal de São Carlos, 2020-11-12)
Refill Friction Stir Spot Welding has grown as an interesting alternative to conventional joining techniques in recent years, especially when it comes to high strength aluminum alloys. Although current results show promise, ...
Multilayered refill friction stir spot welding of AA2024 and aluminum foils for electric vehicle battery application
(Universidade Federal de São Carlos, 2020-11-06)
Different processes are currently being used to weld aluminum and copper in a multilayered configuration in battery pouches for the automotive industry. The methods most used are mechanical joint, ultrasonic welding, laser ...
Comportamento de fluência e tração a quente do aço inoxidável austenítico AISI 201LN
(Universidade Federal de São Carlos, 2020-09-21)
Among the different stainless steel (SS) series, the 200 series, also known as Cr-Ni-Mn alloys, has recently been gaining prominence worldwide. In spite of that, studies addressing the high-temperature deformation these ...
Estudo sobre a formação da interface em soldas dissimilares de alumínio e aço galvanizado durante o processo de soldagem por fricção por ponto (RFSSW) com controle por carga
(Universidade Federal de São Carlos, 2022-03-29)
In the current scientific and technological scenario, the increased demand for dissimilar joints aiming a combination of optimized mechanical properties has driven innovations. Based on this, the present project proposes ...
Evolução microestrutural e propriedades mecânicas das ligas Al-10%Si-0,45%Mg e Al-10%Si-1,0%Mg
(Universidade Federal de São Carlos, 2021-07-28)
Al-Si alloys with high silicon (Si) content are widely used in aerospace, automotive, microelectronics, among others. In this context, the Al-10 wt.% Si alloys with the addition of Magnesium (Mg) are alternatives that ...
Weldability of AA5083-O/H111 and naval GL D36 steel lap joints by friction stir welding
(Universidade Federal de São Carlos, 2021-01-25)
Steel structures welded with aluminum alloys, which combine the low cost and high mechanical strength of steel with the weight reduction and the excellent specific properties of the aluminum alloys, are in great demand. ...
Estudo do tratamento térmico de envelhecimento em patamar simples e duplo da liga UNS N09925
(Universidade Federal de São Carlos, 2023-05-29)
It is well known that several researches related to the development of renewable and alternative energy sources are currently in course. However, with the continuous increase on energy demand around the world, it is still ...