Buscar
Mostrando ítems 21-30 de 35
Análise da microestrutura, parâmetros térmicos e de propriedades mecânicas na solidificação de ligas com alto teor de cobre Al-(x)%Cu-7%Si
(Universidade Federal de São Carlos, 2019-02-26)
Ternary Al-15%Cu-7%Si and Al-22%Cu-7%Si alloys specimens were obtained by transient directional solidification (DS). This technique is able to provide a very large range of cooling rates and microstructures to be correlated ...
Crescimento super e subcrítico de trincas em vidros e vitrocerâmicos analisado via indentacão
(Universidade Federal de São Carlos, 2012-07-02)
In this dissertation we quantified properties that may better describe the mechanical behaviour of different glasses and glass-ceramics of the Na2O-CaO-SiO2-P2O5 system, based on the Biosilicate®chemical composition developed ...
Evolução microestrutural e propriedades mecânicas decorrentes da solidificação das ligas Al-11%Si-xCu
(Universidade Federal de São Carlos, 2018-11-21)
Al-Si-Cu ternary alloys are highly used and recommended to produce joints of aluminum alloys using brazing process. Dissimilar joints between these alloys and stainless steels, carbon steels and low alloy steels can also ...
Análise da microestrutura, parâmetros térmicos e de propriedades mecânicas na solidificação direcional de ligas Al-Mg-Fe
(Universidade Federal de São Carlos, 2017-01-18)
Al-Mg-Fe alloys are appointed as favorable ones in respect of the costs involved and all the required properties for successful vessel service. However, experimental inter-relations of solidification thermal parameters, ...
Fadiga de aços TWIP de baixa densidade produzidos por conformação por spray e forjamento rotativo.
(Universidade Federal de São Carlos, 2020-02-19)
The present study evaluated the mechanical properties in monotonic and
cyclic stress of two low-density steel designed by thermodynamic calculations
aiming stacking fault energy values that would allow different plasticity ...
Refill friction stir spot welding: investigation of the similar and dissimilar welding of AA5754-H22 and AA6061-T6 sheets
(Universidade Federal de São Carlos, 2019-06-03)
The automotive industry is shifting to a new paradigm of material utilization in vehicles. Different parts of the car structural body are increasingly being made of materials selected to have a customized performance ...
Correlações entre propriedades dinâmico-mecânicas e durabilidade sob fadiga mecânica em compósitos de polipropileno/polipropileno maleificado/fibra de vidro
(Universidade Federal de São Carlos, 2006-09-06)
Although the influence of interfacial adhesion on short-term mechanical
performance of fiber-reinforced thermoplastic composites has been well
established, very little published information is available on the influence ...
Influence of Bobbin Tool Friction Stir Welding (BT-FSW) variants on the microstructure and properties of AA2060 and AA2196 aluminum alloys
(Universidade Federal de São Carlos, 2020-06-18)
In order to reduce total costs in aircrafts production, operation and maintenance, materials and processing techniques have been continuously further optimized. In this scenario, aluminum-lithium alloys have been studied ...
Mechanical properties and metallurgical characterization of AA6082-T6 alloy welded by refill friction stir spot welding
(Universidade Federal de São Carlos, 2019-07-30)
The efforts to produce automobiles with intense use of aluminum alloys is growing and the 6XXX series of aluminum alloys are important for this scenario. However, the current joining technologies applied in these alloys ...
Correlação entre morfologia, percolação elétrica e propriedades mecânicas de compósitos da blenda PLA/PBS com grafite expandido
(Universidade Federal de São Carlos, 2013-12-06)
In recent years, researchers from industry and universities have focused
their interests in polymer nanocomposites, especially in multifunctional
composites. The composites made from nano expanded graphite ( nGE ) ...