Search
Now showing items 311-320 of 449
Microestrutura, resistência mecânica e corrosão sob tensão em ligas de alumínio Al-0,3%Fe e Al-4%Cu processadas por extrusão em canal angular
(Universidade Federal de São Carlos, 2019-04-29)
Grain refinement is an important hardening mechanism in metallic alloys, notably when the grain size reaches the submicrometer scale. For this purpose, several techniques of Severe Plastic Deformation (SPD) have been ...
Modelagem computacional e análise das propriedades termodinâmicas do líquido super-resfriado do sistema Fe-Nb-B
(Universidade Federal de São Carlos, 2019-04-22)
Amorphous alloys of the Fe-Cr-Nb-B system are promising materials to supply the demand for new pipe coatings of higher wear resistance in the petrochemical industry due to its good abrasion and corrosion resistance properties. ...
Implementação do sistema de cristalização superficial induzida por laser em vidro de composição eutética
(Universidade Federal de São Carlos, 2019-03-01)
The radiation from lasers has been successfully applied to materials
processing such as drilling, cutting and welding, sintering of ceramic oxides,
surface heat treatment, directional solidification of single crystal ...
Produção e caracterização de ligas do sistema Al-Co-Fe- Cr e aplicações como recobrimentos para barreiras térmicas
(Universidade Federal de São Carlos, 2015-07-23)
Since the discovery of the quasicrystalline alloys by D. Schechtamn in 1984,
many research has been done in terms of coating application of these materials
and their intermetallic approximants due to their physical and ...
Otimização do processo de soldagem robotizada tandem GMAW do aço ASTM A572 G50
(Universidade Federal de São Carlos, 2018-10-31)
The tandem welding process employs double wire feed in a single torch,
providing increased deposition rate and consequent reduction in process times.
However, the process complexity increases because the correct combination ...
CeO2 - 10% MOL Gd2O3: efeito da codopagem com X% MOL Sm2O3 (O5 X 52) na microestrutura e na condutividade elétrica
(Universidade Federal de São Carlos, 2011-09-16)
Fuel cells are the most promising technology for producing clean energy. In particular, the Solid Oxide Fuel Cell (SOFC) stands out among the various types due to high efficiency at high temperatures (800 ~ 1000°C) resulting ...
Análise da microestrutura, parâmetros térmicos e de propriedades mecânicas na solidificação de ligas com alto teor de cobre Al-(x)%Cu-7%Si
(Universidade Federal de São Carlos, 2019-02-26)
Ternary Al-15%Cu-7%Si and Al-22%Cu-7%Si alloys specimens were obtained by transient directional solidification (DS). This technique is able to provide a very large range of cooling rates and microstructures to be correlated ...
Nucleação transiente e estacionária em dissilicato de lítio
(Universidade Federal de São Carlos, 2018-05-29)
Glasses and supercooled liquids tend to crystallize below the melting temperature. Crystallization is a phase transformation where the atomic structure ceases to be non-crystalline and becomes periodic. The focus of this ...
Desenvolvimento de um novo fundente para substituir o feldspato em composições de grês porcelanato
(Universidade Federal de São Carlos, 2004-08-27)
Amongst the various types of ceramic tiles, the porcelainized stoneware tile stands out due to its technical properties (low water absorption, high mechanical strength and high abrasion, chemical attack and frost resistance). ...
Análise do comportamento mecânico a quente do aço inoxidável super duplex UNS S32760 através de mapas de processamento
(Universidade Federal de São Carlos, 2013-12-19)
The need for materials with higher mechanical and corrosion resistance in corrosive environments, such as in oil extraction in saline media, paper and pressure vessel industry, has led to the use of stainless steel Super ...