Search
Now showing items 21-30 of 41
Análise da microestrutura, parâmetros térmicos e de propriedades mecânicas na solidificação de ligas com alto teor de cobre Al-(x)%Cu-7%Si
(Universidade Federal de São Carlos, 2019-02-26)
Ternary Al-15%Cu-7%Si and Al-22%Cu-7%Si alloys specimens were obtained by transient directional solidification (DS). This technique is able to provide a very large range of cooling rates and microstructures to be correlated ...
Efeito de diferentes rotas de processamento nas propriedades de armazenagem de hidrogênio da liga Mg – 8% p. Fe
(Universidade Federal de São Carlos, 2018-03-02)
Interested in developing new, and less dependent on non-renewable
energy sources, researchers have been looking for different alternatives for
energy systems in the recent years. The “Hydrogen Economy” is an alternativ ...
Eletrodeposição de ligas bioabsorvíveis do sistema Fe-Mn
(Universidade Federal de São Carlos, 2019-03-25)
Stents are medical devices which promote the opening and mechanical support of clogged blood vessels and, once applied, cannot be removed. The manufacture of bioabsorbable stents is desirable to avoid several subsequent ...
Mg-containing multicomponent alloys produced by high-energy ball milling for hydrogen storage
(Universidade Federal de São Carlos, 2020-02-20)
Hydrogen is a promising energy carrier that allows the use of energy in a sustainable form. However, safe and efficient hydrogen storage is a scientific and technological challenge that still has to be overcome. Recently ...
Fadiga de aços TWIP de baixa densidade produzidos por conformação por spray e forjamento rotativo.
(Universidade Federal de São Carlos, 2020-02-19)
The present study evaluated the mechanical properties in monotonic and
cyclic stress of two low-density steel designed by thermodynamic calculations
aiming stacking fault energy values that would allow different plasticity ...
Efeito do revenimento sobre a resistência à corrosão do aço inoxidável uns s41426
(Universidade Federal de São Carlos, 2020-02-28)
Supermartensitic stainless steels were developed during the 1990s as an alternative to duplex stainless steels for manufacture of oil country tubular goods. As a result of microstructural variations caused during tempering ...
Estudo da viabilidade de formação de nitreto de boro em aços inoxidáveis ferríticos
(Universidade Federal de São Carlos, 2020-03-02)
Since the 90s, the petroleum industry has been conducting research on alloys that are wear and corrosion resistant once several equipment parts used in the oil exploitation, extraction and production, such as pipes, joints, ...
Manufatura aditiva da liga reciclada Al-Fe-Cr-Ti formadora de fase quasicristalina
(Universidade Federal de São Carlos, 2020-02-27)
The precipitation of quasicrystalline phase in an α-Al dendritic matrix provides Al-based alloys with high mechanical and wear resistance, mainly at high temperatures, which are promising for applications as automotive and ...
Efeito da re-nitretação nas propriedades de matrizes de extrusão a quente de alumínio, confeccionadas em aços ferramenta vex e h13
(Universidade Federal de São Carlos, 2018-07-08)
Aluminum extrusion is a thermomechanical process widely used throughout the world, and the performance of this process is strongly dependent on the quality of the tool steel used in the manufacture of the dies. In this ...
Amorfização e cristalização da liga fe68cr8mo4nb4b16: caracterização através de técnicas avançadas de microscopia eletrônica
(Universidade Federal de São Carlos, 2019-08-05)
Stainless steels of the different classes can have their composition modified through the addition of boron, aiming to obtain both amorphous phases and the controlled formation of borides. The formation of amorphous phase ...