Search
Now showing items 1-10 of 28
Design, production and advanced characterization of CoCrFeMnNi-based medium- and high-entropy alloys: understanding the interplay with composition, microstructure, and mechanical properties
(Universidade Federal de São Carlos, 2024-04-12)
Worldwide, a great research effort is being employed in the development of Medium/high entropy alloys (M/HEAs). Among the M/HEAs produced to date, great emphasis is given to the equiatomic Co20Cr20Fe20Mn20Ni20 (at.%) alloy ...
Ligas beta Ti-Nb-Zr(-Ta-Mo) multiprincipais com baixo módulo de elasticidade
(Universidade Federal de São Carlos, 2023-07-25)
The use of Ti-6Al-4V alloy as a biomaterial is more convenient among Ti alloys,
as it is produced on a larger scale due to aeronautical applications. However, it
is known that Ti-6Al-4V alloy can be harmful to the patient’s ...
Produção e caracterização de ligas Al-(3, 5, 10)Mg-0,1Sc por solidificação direcional e refusão superficial a laser
(Universidade Federal de São Carlos, 2024-04-22)
The present study involved the investigation of the Al-3, -5, and -10% Mg-0.1% Sc alloys processed either by Directional Solidification (DS) or Laser Surface Remelting (LSR), as well as correlating the corresponding ...
Influência das condições de eletrodeposição sobre a resistência a corrosão, susceptibilidade à fragilização por hidrogênio e à corrosão sob tensão do aço ABNT – 4340 revestido com liga Zn/Ni
(Universidade Federal de São Carlos, 2011-01-28)
Zinc-nickel alloys were electrodeposited on ABNT 4340 high strength steel in chloride acid media. The effect of the electrolyte composition and electroplating conditions on cathodic efficiency, chemical composition, ...
Efeito da adição de Ni na microestrutura bainítica de um novo aço para roscas e cilindros de plastificação de polímeros
(Universidade Federal de São Carlos, 2019-09-02)
Nitriding steels, such as DIN 1.8550, are used in the manufacture of screws and barrels for injection molding machines and plastic extruders. The hardening process of DIN 1.8550 occurs via water or oil quenching followed ...
Microstructure, corrosion, and wear resistance of a boron-modified duplex stainless steel produced by laser powder bed fusion
(Universidade Federal de São Carlos, 2024-03-18)
A duplex stainless steels (DSS) containing 0.3 and 0.6 wt.% of boron were produced by laser powder bed fusion (L-PBD) with parameters based on Box-Behnken design. The microstructure was evaluated by XRD, OM, SEM, EBSD, ...
Design de ligas multicomponentes do sistema Ti-V-Nb-M (M = Cr, Co E Ni) para armazenagem de hidrogênio
(Universidade Federal de São Carlos, 2023-05-15)
Body Centered Cubic (BCC) multicomponent alloys have gained attention in the research of materials for H2 storage. These alloys have the potential to optimize H2 storage properties via compositional control. However, the ...
Estabilidade microestrutural da liga Cu-0,8Cr-0,07Zr após extrusão em canal angular em temperatura criogênica
(Universidade Federal de São Carlos, 2021-12-20)
Severe Plastic Deformation (SPD) are well established routes with regard to the
intense microstructural refining of metals and alloys up to the submicrometer (<
1 μm) and/or nanometer (< 100 nm) scales. Lowering the ...
Simulação física da ZTA de aços inoxidáveis lean duplex 2101 e 2404 em sistema Gleeble®: evolução microestrutural e resistência à corrosão
(Universidade Federal de São Carlos, 2022-06-08)
In this study, physical simulations of welding thermal cycles were performed to evaluate the microstructural evolution and corrosion resistance of the heat-affected zones (ZTAs) of lean duplex stainless steels (LDSSs) 2101 ...
Avaliação de corrosão sob tensão e corrosão-fadiga do aço API 5L X70 em solução etanólica sintética
(Universidade Federal de São Carlos, 2022-04-07)
API X70 steel has been widely used in Brazil for the manufacture of ethanol transport pipelines, however, a recognized problem in carbon steel pipes exposed to ethanol is stress corrosion cracking (SCC) and, in addition, ...