Search
Now showing items 41-50 of 70
Estudo da viabilidade de formação de nitreto de boro em aços inoxidáveis ferríticos
(Universidade Federal de São Carlos, 2020-03-02)
Since the 90s, the petroleum industry has been conducting research on alloys that are wear and corrosion resistant once several equipment parts used in the oil exploitation, extraction and production, such as pipes, joints, ...
Manufatura aditiva da liga reciclada Al-Fe-Cr-Ti formadora de fase quasicristalina
(Universidade Federal de São Carlos, 2020-02-27)
The precipitation of quasicrystalline phase in an α-Al dendritic matrix provides Al-based alloys with high mechanical and wear resistance, mainly at high temperatures, which are promising for applications as automotive and ...
Estudo de ligas Ti-Nb-Zr e Ti-Nb-Mg, fundidas e na forma de recobrimentos sobre aço inoxidável, para aplicações biomédicas
(Universidade Federal de São Carlos, 2019-10-31)
In the present thesis, nanostructured coatings of Ti (100 - (20 + z)) -Nb20-Xz alloys (X = Zr and Mg) were produced by sputtering. So with that, it was possible to analyze the effect of the addition of Zr and Mg on the ...
Efeito da re-nitretação nas propriedades de matrizes de extrusão a quente de alumínio, confeccionadas em aços ferramenta vex e h13
(Universidade Federal de São Carlos, 2018-07-08)
Aluminum extrusion is a thermomechanical process widely used throughout the world, and the performance of this process is strongly dependent on the quality of the tool steel used in the manufacture of the dies. In this ...
Amorfização e cristalização da liga fe68cr8mo4nb4b16: caracterização através de técnicas avançadas de microscopia eletrônica
(Universidade Federal de São Carlos, 2019-08-05)
Stainless steels of the different classes can have their composition modified through the addition of boron, aiming to obtain both amorphous phases and the controlled formation of borides. The formation of amorphous phase ...
Otimização das propriedades mecânicas da liga de alumínio 319 contaminada com ferro
(Universidade Federal de São Carlos, 2019-02-15)
The influence of iron additions (0.6, 0.8, 1.2 and 1.5 wt.%) and heat treatment on the microstructure and tensile properties of the 319-aluminum alloy processed by spray forming and rotary swaging was investigated. The ...
Mechanical properties and metallurgical characterization of AA6082-T6 alloy welded by refill friction stir spot welding
(Universidade Federal de São Carlos, 2019-07-30)
The efforts to produce automobiles with intense use of aluminum alloys is growing and the 6XXX series of aluminum alloys are important for this scenario. However, the current joining technologies applied in these alloys ...
Design of high entropy alloys for hydrogen storage: study of the Mg-V-Al-Cr-Ni, Mg-Al-Ti-Mn-Nb and Ti-V-Nb-Cr systems
(Universidade Federal de São Carlos, 2021-05-21)
The advent of high entropy alloys (HEA) has brought new opportunities and challenges to metallurgy. Due to extensive compositional field of HEAs, the possibility of controlling properties in a composition-driven approach ...
Study of bioactivity, corrosion resistance and fatigue behavior of Ti-12Mo-6Zr-2Fe alloy after different surface treatments
(Universidade Federal de São Carlos, 2020-11-19)
Demand for new implants with improved bioactivity, corrosion resistance, and optimal mechanical properties has been increasing considerably. In this sense, different surface treatments are applied in titanium alloys to ...
Equilíbrio de fases e propriedades mecânicas da liga de elemento multiprincipal Cr40Co40Ni20
(Universidade Federal de São Carlos, 2021-02-19)
In the pursuit for materials with improved performance, multi-principal element alloys (MPEAs) attract the interest of the scientific community, due to their large composition space. Some Cr-Co-Ni alloys stand out with ...