Buscar
Itens para a visualização no momento 31-40 of 70
Caracterização microestrutural e propriedades de desgaste de revestimento de aço inoxidável supermartensítico modificado com boro processado por HVOF
(Universidade Federal de São Carlos, 2019-05-28)
Stainless steels are recognized as good materials to be used in corrosive environments, but their wear resistance does not exhibit good results. Therefore, researches have been developed to increase the wear resistance of ...
Modelagem computacional e análise das propriedades termodinâmicas do líquido super-resfriado do sistema Fe-Nb-B
(Universidade Federal de São Carlos, 2019-04-22)
Amorphous alloys of the Fe-Cr-Nb-B system are promising materials to supply the demand for new pipe coatings of higher wear resistance in the petrochemical industry due to its good abrasion and corrosion resistance properties. ...
Produção e caracterização de ligas do sistema Al-Co-Fe- Cr e aplicações como recobrimentos para barreiras térmicas
(Universidade Federal de São Carlos, 2015-07-23)
Since the discovery of the quasicrystalline alloys by D. Schechtamn in 1984,
many research has been done in terms of coating application of these materials
and their intermetallic approximants due to their physical and ...
Análise da microestrutura, parâmetros térmicos e de propriedades mecânicas na solidificação de ligas com alto teor de cobre Al-(x)%Cu-7%Si
(Universidade Federal de São Carlos, 2019-02-26)
Ternary Al-15%Cu-7%Si and Al-22%Cu-7%Si alloys specimens were obtained by transient directional solidification (DS). This technique is able to provide a very large range of cooling rates and microstructures to be correlated ...
Efeito de diferentes rotas de processamento nas propriedades de armazenagem de hidrogênio da liga Mg – 8% p. Fe
(Universidade Federal de São Carlos, 2018-03-02)
Interested in developing new, and less dependent on non-renewable
energy sources, researchers have been looking for different alternatives for
energy systems in the recent years. The “Hydrogen Economy” is an alternativ ...
Eletrodeposição de ligas bioabsorvíveis do sistema Fe-Mn
(Universidade Federal de São Carlos, 2019-03-25)
Stents are medical devices which promote the opening and mechanical support of clogged blood vessels and, once applied, cannot be removed. The manufacture of bioabsorbable stents is desirable to avoid several subsequent ...
Mg-containing multicomponent alloys produced by high-energy ball milling for hydrogen storage
(Universidade Federal de São Carlos, 2020-02-20)
Hydrogen is a promising energy carrier that allows the use of energy in a sustainable form. However, safe and efficient hydrogen storage is a scientific and technological challenge that still has to be overcome. Recently ...
Influência da adição de cério na microestrutura e comportamento de oxidação de aços inoxidáveis Fe-Mn-Si-Cr-Ni com efeito de memória de forma
(Universidade Federal de São Carlos, 2020-01-15)
In this study, the influence of small cerium additions on the microstructure and
oxidation behavior of Fe-Mn-Si-Cr-Ni shape memory stainless steels (SMSSs)
was investigated. The results show that the Ce addition in the ...
Fadiga de aços TWIP de baixa densidade produzidos por conformação por spray e forjamento rotativo.
(Universidade Federal de São Carlos, 2020-02-19)
The present study evaluated the mechanical properties in monotonic and
cyclic stress of two low-density steel designed by thermodynamic calculations
aiming stacking fault energy values that would allow different plasticity ...
Efeito do revenimento sobre a resistência à corrosão do aço inoxidável uns s41426
(Universidade Federal de São Carlos, 2020-02-28)
Supermartensitic stainless steels were developed during the 1990s as an alternative to duplex stainless steels for manufacture of oil country tubular goods. As a result of microstructural variations caused during tempering ...