Buscar
Itens para a visualização no momento 31-40 of 273
Desenvolvimento e caracterização de biocompósitos de blendas TPU/PCL com hidroxiapatita para produção de scaffolds bioativos via impressão 3D
(Universidade Federal de São Carlos, 2022-08-02)
The increasing need for biological tissues to treat defects caused by disease or injury has demanded new solutions to provide functional substitutes that supply tissue shortages and suit the needs of each patient. In this ...
Desenvolvimento de compósito epóxi/fibra de vidro produzido por enrolamento filamentar para revestimento interno de coluna de produção de petróleo em aço carbono na exploração offshore
(Universidade Federal de São Carlos, 2021-08-04)
Epoxy/glass fiber composites (GRE) were produced by filament winding with a view to application as a liner in a carbon steel tube to replace all-metal super duplex stainless steel column in offshore petroleum exploration. ...
Influência da incorporação de poli(ácido lático) - PLA, de pó de madeira e outros aditivos no comportamento físico-mecânico do poli(hidroxibutirato) - PHB.
(Universidade Federal de São Carlos, 2004-04-30)
Polymeric materials are used today in the most varied sectors and the deleterious effects of their application, particularly in the short-term, have led to increasing environmental concern. On the other hand, innovative ...
Estratégias para a síntese de compósitos moleculares derivados de poliuretanas
(Universidade Federal de São Carlos, 2009-02-20)
In this work, we investigated strategies to obtain polyurethanebased molecular composites containing metal oxide nanoparticles chemically attached to polyurethane polymeric chain. In Strategy 1, nanoparticles functionalized ...
Influência da tensão residual no empenamento de peças aeronáuticas usinadas a partir de placas laminadas de ligas de aluminio da serie 7XXX
(Universidade Federal de São Carlos, 2002-02-19)
The fast growing of regional jets market has required from airframe manufacturers a prompt attending to market demands and the primary parts fabrication at a planned quality, quantity, and time at low costs. In order to ...
Processamento, caracterização e determinação do perfil de polarização do Poli(fluoreto de vinilideno)
(Universidade Federal de São Carlos, 2009-03-25)
This work characterized the ferroelectric polarization of the β-PVDF differentiating the individual contributions of the orientation and the crystalline phases in the remanent polarization of the PVDF. Those contributions ...
Conformação viscoplástica por rolos a frio e caracterização de substratos de alumina
(Universidade Federal de São Carlos, 2008-03-20)
Alumina ceramic substrates were conformed by viscoplastic conformation by cold roll pressing in a range of thickness between 100 and 200 µm, which one presents a great technology interesting for eletro-eletronic applications. ...
Caracterização de sistemas varistores a base de SnO2-MnO2.
(Universidade Federal de São Carlos, 2002-08-02)
This work focussed on the effect of addition of Nb2O5 on the electrical and microestructural properties of SnO2-MnO2 based ceramics. It was also studied the effect of heat-treatments in a oxygen-rich atmosphere in these ...
Desenvolvimento e caracterização de filmes tubulares de nanocompósitos de PEAD/EVA/argila organofílica
(Universidade Federal de São Carlos, 2008-03-10)
In this work, the use of ethylene-vinyl acetate copolymer (EVA) in substitution to compatibility agents normally employed in the production of high density polyethylene (HDPE) nanocomposites (such as polyethylene grafted ...
Mecanismos de controle da hidratação da magnésia visando sua utilização em concretos refratários
(Universidade Federal de São Carlos, 2009-06-30)
The increasing demand in the last years enhanced significantly the steel industry production As a consequence, most of the aspects regarding its production had to be reviewed aiming an optimum output. Concerning this goal, ...