Search
Now showing items 221-230 of 272
Fabricação de amostras maciças da liga Fe-Co-B-Si-Nb com estrutura amorfa pela rota de atomização e extrusão a quente
(Universidade Federal de São Carlos, 2018-08-23)
Metallic glasses alloys are a relatively new class of materials characterized by the absence of structural long-range order. During heating, these alloys exhibit a glass transition at a temperature (Tg) before reaching the ...
Desenvolvimento do aço inoxidável supermartensítico resistente ao desgaste por conformação por spray para aplicação em "risers"
(Universidade Federal de São Carlos, 2013-04-24)
The oil exploitation and production in the pre-salt layers in safe, efficient and economically viable way depend on the development of materials that bear the severe conditions found in their applications during their whole ...
Crescimento super e subcrítico de trincas em vidros e vitrocerâmicos analisado via indentacão
(Universidade Federal de São Carlos, 2012-07-02)
In this dissertation we quantified properties that may better describe the mechanical behaviour of different glasses and glass-ceramics of the Na2O-CaO-SiO2-P2O5 system, based on the Biosilicate®chemical composition developed ...
Influência do processamento no comportamento mecânico de nanocompósitos de poliamida 6 com nanosílica
(Universidade Federal de São Carlos, 2015-10-06)
In this study nanocomposites of polyamide-6 (PA-6) reinforced with silica
nanoparticles (SiO2) were prepared in order to promote improved mechanical
properties for engineering applications. The nanoparticles’ surfaces ...
Friction spot joining of aluminum alloy 2024-t3 and carbon-fiber-reinforced polyphenylene sulfide composite laminate with additional pps film interlayer
(Universidade Federal de São Carlos, 2015-11-30)
Friction Spot Joining (FSpJ) is a prize-winning joining technique for hybrid
metal-polymer composite structures. This master thesis was devised to
investigate the feasibility of FSpJ of metal-composite structures with ...
Efeito do envelhecimento em baixa temperatura nas propriedades de aços inoxidáveis lean duplex
(Universidade Federal de São Carlos, 2016-03-23)
In this work, the mechanical and corrosion properties of two lean duplex steels
(LDSS) 2101 and 2404 aged at 475 °C for up to 2000 h were assessed, and the
obtained results were compared with the standard duplex stainless ...
Desenvolvimento de metodologia para identificação de oportunidades de inovação tecnológica em tratamento de superfícies de jóias folheadas
(Universidade Federal de São Carlos, 2006-08-07)
Technological innovation has been greatly discussed worldwide for its central
role in economy. One important factor to innovation is the identification of
technological opportunities. Information on customer requirements ...
Produção e caracterização de recobrimentos de aço, empregando a liga amorfizável Fe-Cr-Nb-B
(Universidade Federal de São Carlos, 2012-02-13)
The equipments used to oil flow are submitted in an aggressive environment with the presence of hydrogen sulphide, carbon dioxide and sand, which contribute to corrosion and wear of the surface. To resist of these requests ...
Resistência de linha de solda em moldados por injeção de compósitos de polipropileno com talcos e fibra de vidro.
(Universidade Federal de São Carlos, 2003-07-03)
The presence of weld lines in injection moulded reinforced thermoplastics
contributes towards substantial reduction in mechanical properties, due to
unfavourable orientation of the reinforcement in the weak plane of the ...
Resistividade elétrica de cerâmicas de alumina a temperatura ambiente e a 600oC
(Universidade Federal de São Carlos, 1992-03-10)
Alumina (Al2O3) ceramic specimens have been prepared via traditional ceramic process, namely, powder analyses, classification and conditioning, uniaxial cold pressong and sintering. DC electrical resistivity measurements ...