Buscar
Mostrando ítems 281-290 de 426
Estruturação da blenda de PP/PVMS na presença de nanopartículas
(Universidade Federal de São Carlos, 2014-09-26)
Blends technology get by mechanical blend extends the range of polymer properties and makes it possible to fit them for specific applications. The performance and the mechanical properties of immiscible polymer blends are ...
Sinterização em forno de micro-ondas da hexaferrita de bário dopada com cromo
(Universidade Federal de São Carlos, 2014-08-01)
Barium hexaferrite (BaM) is a magnetic ceramic material with a hexagonal crystal structure, which is widely used as a permanent magnet and in electronic devices, magnetic recording media, electromagnetic wave absorbers, ...
Desenvolvimento de concentrados de PVC reforçados com fibras de vidro longas (LF-PVC) para reforçar compostos de PVC rígido moldados por injeção
(Universidade Federal de São Carlos, 2013-12-06)
This work presents a study and development of long glass fiber PVC pellet concentrate (LF-PVC) manufactured by extrusion similar wire coating technique to reinforce pelletized rigid PVC compounds to produce injection molding ...
Fotoluminescência dos compostos (Ba1-xSrx)MoO4 sintetizados com diferentes solventes
(Universidade Federal de São Carlos, 2013-10-15)
The molybdates with scheelite-type tetragonal structure is a family of inorganic materials that has received considerable attention since the discovery of their luminescent properties, with emission in the visible spectral ...
Laminação em atmosfera inerte de ligas à base de magnésio para armazenagem de hidrogênio
(Universidade Federal de São Carlos, 2014-08-08)
In recent decades, the use of energy presented strong growth due to the need of supplying the daily energy consumption of approximately seven billion people. To solve this problem, it has been investigated the nature, ...
Caracterização elétrica e microestrutural de vitrocerâmicas condutoras por íon lítio com estrutura NASICON
(Universidade Federal de São Carlos, 2013-07-22)
This doctoral thesis presents results of the chemical, thermal, structural, microstructural and electrical characterization of glass and glass-ceramics with Li1,3Al0,3Ti1,7(PO4)3 (LATP), Li1,5Al0,5Ge1,5(PO4)3 (LAGP) and ...
Graftização de anidrido maleico em polipropileno, por extrusão reativa, na presença de nanopartículas: estudo de reação e monitoramento in-line
(Universidade Federal de São Carlos, 2014-04-17)
The grafting reaction of maleic anhydride onto polypropylene by reactive extrusion, in presence of nanoclay, was studied. The organoclay (Cloisite 20A) was used as support for dicumyl peroxide (DCP), and different amounts ...
Síntese e processamento de titânia nanoestruturada
(Universidade Federal de São Carlos, 2013-05-09)
The TiO2 is widely used in several applications. In recent times these applications have been enhanced with the use of the nanotechnology. In this work, the sol-gel synthesis process, at low temperature, of TiO2 nanoparticles ...
Estudo de fibras de folhas de abacaxis (gênero Ananas) e sua utilização em compósitos biodegradáveis com matriz de poli(ácido lático) (PLA)
(Universidade Federal de São Carlos, 2014-08-19)
In this work natural fibers from new pineapple varieties were studied aiming at their application as mechanical reinforcement for green polymer composites. Eighteen varieties of pineapple leave fibers (PALFs) were then ...
Efeito da precipitação de fase secundária na resistência à corrosão da superliga UNS N26455
(Universidade Federal de São Carlos, 2013-10-18)
The UNS N26455 is a superalloy of the Ni-Cr-Mo system used on offshore platforms as components of injection pumps. This alloy has low-carbon content and high levels of Cr and Mo. This composition gives the material high ...