Search
Now showing items 121-130 of 418
Processamento de pós ultrafinos e nanométricos por moagem de alta energia para a obtenção de compósitos cerâmicos Al2O3-(5%vol.)TIC.
(Universidade Federal de São Carlos, 2002-09-13)
The major objective of this thesis was to study the processing behaviour of Al2O3 ultra-fine and nanosized powders obtained by high energy milling
(HEM), to produce, after forming and sintering, Al2O3 .(5%vol.)SiC and Al2O3 ...
Conformação por spray da liga formadora de fase amorfa Fe66B30Nb4
(Universidade Federal de São Carlos, 2008-08-07)
The goal of this doctoral thesis was to contribute to the technology of amorphous metals production with dimensions of the order of millimeters or centimeters through the process of spray forming for the ternary Fe66B30Nb4 ...
Estudos microrreológicos da blenda PBT/SAN.
(Universidade Federal de São Carlos, 2006-09-22)
This work was motivated by the need of a better understanding of the
microrheological characteristics of polybutylene terephthalate, PBT, polymer
blends, such as the matrix phase PBT and the styrene-acrylonitrile, SAN
copolymer ...
Avaliação da qualidade final de juntas dissimilares de ligas de alumínio 2024-6056 e 7075-6056 soldadas por FSW - friction stir welding
(Universidade Federal de São Carlos, 2006-03-31)
The aeronautic industry has been studying the FSW (Friction Stir Welding) process since its development by TWI (The Welding Institute), in 1991. Nowadays it has been used in the airplanes fuselage of the Eclipse Aviation ...
Estudo da tenacidade à fratura por meio do método do trabalho essencial de fratura (EWF) da blenda PBT/ABS, reforçada com fibra de vidro
(Universidade Federal de São Carlos, 2008-06-05)
High rubber content acrylonitrile-butadiene-styrene terpolymer (ABS) has been used to tough PBT. As a result, super tough PBT/ABS blends under notched Izod impact have been obtained. However, there has been a significant ...
Microestrutura e propriedades mecânicas de ligas Al-Si hipoeutéticas conformadas por spray.
(Universidade Federal de São Carlos, 2005-06-29)
The aims of this work were the microstructural and tensile properties
characterization of the hypoeutectic spray formed Al-Si 319 and 380 alloys. The
alloys were melted by induction furnace, gas atomized with nitrogen ...
Atomização a gás do aço ferramenta A2: efeito dos parâmetros de processo nas características do pó
(Universidade Federal de São Carlos, 2022-03-23)
Gas atomization is the main method in powder metallurgy to produce powders for additive manufacturing (AM). The gas atomization process allows generally spherical and very fine metallic powders with great yield on the ...
Synthesis and characterization of CH3NH3SnI3, Mn doped CH3NH3SnI3 and oxygen-deficient TiO2 as visible-light active semiconductors
(Universidade Federal de São Carlos, 2020-02-14)
CH3NH3SnI3 is an environmentally-friendly (lead-free) perovskite whose synthesis depends on SnI2. Some disadvantages of SnI2 include high cost and tin(IV) contamination. Thus, SnSO4 and C16H30O4Sn are presented as cheaper ...
Nanocompósitos à base de MG: processamento, estrutura e propriedades de novos materiais para armazenagem de hidrogênio
(Universidade Federal de São Carlos, 2006-02-17)
Magnesium is light, abundant and it can store up to 7.6 wt. % of
hydrogen forming the hydride MgH2 and therefore it is a promising material for
hydrogen storage. However, the H-sorption occurs at relatively high
temperatures ...
Moagem de alta energia e deformação plástica severa do Mg e do Mg-Fe na síntese de hidretos para armazenagem de hidrogênio
(Universidade Federal de São Carlos, 2017-03-04)
Magnesium is a light metal with a relatively low cost. It can form magnesium hydride (MgH2), which is interesting for the safe storage of hydrogen in the solid state, thanks to its high gravimetric capacity of 7.6%. The ...