Search
Now showing items 21-30 of 52
Estudo e desenvolvimento de blendas ternárias biodegradáveis a partir de poli(ácido lático), poli(álcool vinílico) e quitosana
(Universidade Federal de São Carlos, 2010-04-08)
The present study examined the use of poly(vinyl alcohol) as a compatibilizing agent between chitosan and PLA and as a diluent for chitosan in an approach where a dispersion chitosan in PVA produced by solution blending ...
Grau de cisão de cadeia na degradação termomecânica de polímeros sob multiplas extrusões
(Universidade Federal de São Carlos, 2004-09-14)
One of the ways to follow the polymer degradation has been to calculate the average number of chain scissions (ns) that occurred during its
thermomechanical history. The average can be extended for each molecular weight ...
Processamento e caracterização de mantas de nanofibras eletrofiadas e orientadas de Poli(fluoreto de vinilideno)
(Universidade Federal de São Carlos, 2009-11-10)
In this work was developed a collector to process aligned uniaxially nanofibers mats and with low dimensions suitable for applications such as sensor or transducer. Such nanofibers mats may have applications where control ...
Estudo da tenacidade à fratura por meio do método do trabalho essencial de fratura (EWF) da blenda PBT/ABS, reforçada com fibra de vidro
(Universidade Federal de São Carlos, 2008-06-05)
High rubber content acrylonitrile-butadiene-styrene terpolymer (ABS) has been used to tough PBT. As a result, super tough PBT/ABS blends under notched Izod impact have been obtained. However, there has been a significant ...
Avaliação de sistema estabilizante para cobertura de cabos aéreos em XLPE.
(Universidade Federal de São Carlos, 2005-08-03)
Overhead energy lines with covered conductors are increasingly used in the 15 kV distribution systems in Brazil. The advantages are, among others, reduced distances between phases, no disruptions due to conductor ...
Desenvolvimento de um colorímetro in-line para o monitoramento da extrusão de polímeros
(Universidade Federal de São Carlos, 2014-01-30)
This work shows the development, construction, validation and application of an in-line colorimeter used for real time color quantification of the melted flow during polymer processing in the extruder. The device uses a ...
Tenacificação de poli(ftalamida) (PPA) através de nanocompósitos com carbonato de cálcio e de blendas com copolímero estireno/etileno-butileno/estireno (SEBS)
(Universidade Federal de São Carlos, 2010-05-20)
This project aims the toughening of a high performance thermoplastic polyphthalamide (PPA). PPA resins is a good choice for special applications where the conditions are more severe than the ones an engineering thermoplastic ...
Utilização de concentrados de eva-argila organofílica obtidos por spray drying, drais e extrusão no desenvolvimento de nanocompósitos poliméricos
(Universidade Federal de São Carlos, 2014-12-15)
The objective of this work was the development of polymer
nanocomposites with montmorillonite organoclays (OMMT) using EVA-OMMT
concentrated obtained by spray drying, Drais and extrusion, making the
characterization and ...
Caracterização de poli(hexametileno biguanida) e suas blendas com poli(álcool vinílico)
(Universidade Federal de São Carlos, 2012-07-31)
In this study, the physical-chemical characterization of poly(hexamethylene biguanide) hydrochloride, PHMB, was performed. It is a low molecular weight synthetic polymer with a broad-spectrum biocidal activity, widely used ...
Desvulcanização termomecânica contínua de borracha natural da banda de rodagem de pneus automotivos por meio do processo de extrusão em rosca dupla
(Universidade Federal de São Carlos, 2015-09-10)
The Natural rubber is a renewable source material widely used in the manufacture of automotive tire tread. The vulcanization results in a high thermodynamic stability and wide working range materials. However, after the ...