Buscar
Itens para a visualização no momento 11-20 of 426
Processamento e caracterização de ligas a base de magnésio para uso como implantes bioabsorvíveis
(Universidade Federal de São Carlos, 2015-02-23)
Magnesium alloys have attracted great interest for use in temporary orthopedic implants to replace existing materials, due to the combination of physical, mechanical and corrosive properties. A magnesium based alloy ...
Metodologia para avaliação do desempenho de tintas para decoração digital de revestimentos cerâmicos
(Universidade Federal de São Carlos, 2016-03-10)
Brazil plays an important role in the consumption and production of
ceramic tiles nowadays. The decoration of tiles by digital inkjet printing, due to
its technical and aesthetic advantages, is a spreading technology and ...
BaCeO3 dopado com 5%Mol Y2O3 : sinterização, microestrutura e condutividade elétrica protônica
(Universidade Federal de São Carlos, 2015-12-18)
The development of solid electrolytes for Solid Oxide Fuel Cells is a challenge to
enabling this technology as sustanaible energy resource. Ceramics based on
Yttrium doped- Barium cerate are potential candidates for this ...
A importância da caracterização do módulo de elasticidade e do amortecimento de refratários por técnica dinâmica
(Universidade Federal de São Carlos, 2013-03-08)
This dissertation tries to understand the mechanisms involving damping phenomenon in ceramic refractory materials, using a dynamic technique. Damping proves to be an interesting parameter to analyze thermal shock damage ...
Estudo da influência de argilitos e feldspatóides em composições de porcelanato
(Universidade Federal de São Carlos, 2011-03-03)
Considering the various types of ceramic tiles used today, the stoneware tile is distinguished by its aesthetic and technical characteristics, such as: very low water absorption (less than 0.5%), high mechanical strength, ...
Avaliação da resistência ao desgaste de aços inoxidáveis conformados por spray
(Universidade Federal de São Carlos, 2011-08-03)
The aim of this work was the study of the microstructure and the wear resistance of two stainless steels, the ferritic-AIF with 27% Cr and the superduplex-SDM modified with boron (3.5% wt.), processed by spray forming. The ...
Fundamentos, experimentos e simulação de tintas térmicas para aplicação em fornos cerâmicos
(Universidade Federal de São Carlos, 2019-03-13)
Regarding the current need of higher sustainability and cost reductions of
industrial processes, some require high amounts of energy due to the high
temperatures involved being siderurgy a good example. In these scenarios ...
Influência das condições de processamento na morfologia e das propriedades mecânicas de sistemas poliméricos moldados por injeção e sua predição através de redes neurais artificiais.
(Universidade Federal de São Carlos, 2004-08-12)
The influence of the injection molding parameters on the morphology and mechanical properties of poly(phenylene sulfide), PPS, and of a 80/20(%wt) blend of PPS/block copolymer styrene-ethylene-butylene-styrene ,SEBS, ...
Concretos refratários avançados com alto teor de carbono
(Universidade Federal de São Carlos, 2010-03-12)
Refractory castables in the Al2O3-SiO2-SiC-C system are applied in the iron making process, including runners for molten slags and metals. Over the past years, several attempts to increase the carbon content of these ...
Desenvolvimento de filmes nanoestruturados de polímeros condutores aplicados a sensores gustativos para avaliação de cafés.
(Universidade Federal de São Carlos, 2006-03-08)
This work aimed the investigation of ultra thin, polymeric film compositions
made by the layer-by-layer deposition technique capable of coffee quality
classification accordingly to stablished standards, using electrical ...