Search
Now showing items 601-610 of 736
Efeito da re-nitretação nas propriedades de matrizes de extrusão a quente de alumínio, confeccionadas em aços ferramenta vex e h13
(Universidade Federal de São Carlos, 2018-07-08)
Aluminum extrusion is a thermomechanical process widely used throughout the world, and the performance of this process is strongly dependent on the quality of the tool steel used in the manufacture of the dies. In this ...
Sistemas nanoestruturados condutores baseados em nanocompósitos poliméricos condutores e mantas eletrofiadas condutoras
(Universidade Federal de São Carlos, 2013-05-10)
In this work its was investigated the influence of the processing on the electrical and dielectric properties of nanostructured polymeric systems obtained by differents techniques. The morphology and structure of the ...
Correlações entre propriedades dinâmico-mecânicas e durabilidade sob fadiga mecânica em compósitos de polipropileno/polipropileno maleificado/fibra de vidro
(Universidade Federal de São Carlos, 2006-09-06)
Although the influence of interfacial adhesion on short-term mechanical
performance of fiber-reinforced thermoplastic composites has been well
established, very little published information is available on the influence ...
Indicadores de produção científica para prospecção tecnológica em manufatura aditiva de biocerâmicas
(Universidade Federal de São Carlos, 2019-05-31)
In the Bone Tissue Engineering, biomaterials are used as scaffolds to produce a support and cell growing. Because of the similarity to the bones cells, ceramic compounds are the main materials used to produce the scaffold. ...
Deformação em canal angular de uma liga Al-4%Cu: efeito dos mecanismos de endurecimento na resistência mecânica e ductilidade
(Universidade Federal de São Carlos, 2011-03-03)
Internal boundaries hardening and precipitation hardening are two important mechanisms acting in metallic alloys. The former has special relevance when the grain size is reduced ...
Amorfização e cristalização da liga fe68cr8mo4nb4b16: caracterização através de técnicas avançadas de microscopia eletrônica
(Universidade Federal de São Carlos, 2019-08-05)
Stainless steels of the different classes can have their composition modified through the addition of boron, aiming to obtain both amorphous phases and the controlled formation of borides. The formation of amorphous phase ...
Degradação em processamento, cinética de cristalização e policondensação no estado sólido de poli(ácido láctico)
(Universidade Federal de São Carlos, 2018-08-31)
In this work, the degradation of poly (lactic acid) (PLA) within conditions
of high temperature, shear stress and humidity was studied. In addition to that,
the crystallization kinetics of these degraded materials was ...
Adesão borracha-latão: a influência do cobalto, do sistema HMMM (hexametoximetilmelamina)-resorcinol e da temperatura na interface
(Universidade Federal de São Carlos, 2006-12-18)
Using a blank compound as reference and brass coated steel tire cords
with 64 and 68.2 % of cooper content, it was studied the effect of the
ingredients cobalt and the HMMM-resorcinol system, and the vulcanization
temperature ...
Desenvolvimento de compósitos biodegradáveis a partir de amido termoplástico e fibras vegetais
(Universidade Federal de São Carlos, 2011-09-16)
This project had as main objectives to obtain and to develop new and biodegradable composites from renewable sources using a thermoplastic starch (TPS) matrix reinforced with different amounts of natural fibers, acuri, ...
Estudo da influência de íons titânio e cobalto nas propriedades magnéticas e absorvedoras de ondas eletromagnéticas de hexaferrita de bário
(Universidade Federal de São Carlos, 2008-02-22)
In this work Cobalt and Titanium doped Barium hexaferrites were
synthesized by the ceramic method in order to study their use as
electromagnetic absorbing materials in high frequencies. The dopants were
used individually ...