Search
Now showing items 11-20 of 28
Influência da nanoargila no envelhecimento higrotérmico de compósitos de polipropileno / PP maleado / fibra de vidro
(Universidade Federal de São Carlos, 2010-05-21)
In short glass fiber (GF) reinforced polypropylene (PP) composites, despite of the chemically inert and non-polar nature of the matrix, the fiber-matrix interfacial integrity may be compromised in a hygrothermal active ...
Propriedades mecânicas das ligas Ti34Cu36Ni8Zr22 e (TiZr)80Co12Fe8
(Universidade Federal de São Carlos, 2012-03-23)
Bulk amorphous and nanocrystalline alloys have attracted great interest from the scientific community. Titanium based alloys have demonstrated potential for formation of amorphous. This study aimed at to evaluate the ...
Avaliação da correlação entre o trabalho essencial de fratura (EWF) e o grau de gelificação de compostos de PVC rígido
(Universidade Federal de São Carlos, 2011-07-14)
Poly(vinyl chloride) or PVC is among the most consumed thermoplastics in the world and has great versatility: A wide range of products, from pipes and rigid window frames to flexible foams, various types of materials such ...
Parâmetros térmicos de solidificação, microestrutura e resistência mecânica de ligas eutéticas Sn-0,7%Cu-(xNi)
(Universidade Federal de São Carlos, 2013-07-29)
Sn-Pb traditional solder alloys were overly utilize in electronic devices industry, since their properties and features use were adequate and well known. In the last years many restrictions and directives were and have ...
Desenvolvimento de concentrados de PVC reforçados com fibras de vidro longas (LF-PVC) para reforçar compostos de PVC rígido moldados por injeção
(Universidade Federal de São Carlos, 2013-12-06)
This work presents a study and development of long glass fiber PVC pellet concentrate (LF-PVC) manufactured by extrusion similar wire coating technique to reinforce pelletized rigid PVC compounds to produce injection molding ...
Influência de polipropileno maleado no comportamento de fratura (EWF) de compósitos de polipropileno/fibra de vidro
(Universidade Federal de São Carlos, 2012-04-11)
Thermoplastic composites reinforced with short glass fibers, to be used in technical engineering applications, usually requires a good balance of properties, such as strength and tenacity. For the case of the composite of ...
Análise da microestrutura, parâmetros térmicos e de propriedades mecânicas na solidificação de ligas com alto teor de cobre Al-(x)%Cu-7%Si
(Universidade Federal de São Carlos, 2019-02-26)
Ternary Al-15%Cu-7%Si and Al-22%Cu-7%Si alloys specimens were obtained by transient directional solidification (DS). This technique is able to provide a very large range of cooling rates and microstructures to be correlated ...
Crescimento super e subcrítico de trincas em vidros e vitrocerâmicos analisado via indentacão
(Universidade Federal de São Carlos, 2012-07-02)
In this dissertation we quantified properties that may better describe the mechanical behaviour of different glasses and glass-ceramics of the Na2O-CaO-SiO2-P2O5 system, based on the Biosilicate®chemical composition developed ...
Evolução microestrutural e propriedades mecânicas decorrentes da solidificação das ligas Al-11%Si-xCu
(Universidade Federal de São Carlos, 2018-11-21)
Al-Si-Cu ternary alloys are highly used and recommended to produce joints of aluminum alloys using brazing process. Dissimilar joints between these alloys and stainless steels, carbon steels and low alloy steels can also ...
Análise da microestrutura, parâmetros térmicos e de propriedades mecânicas na solidificação direcional de ligas Al-Mg-Fe
(Universidade Federal de São Carlos, 2017-01-18)
Al-Mg-Fe alloys are appointed as favorable ones in respect of the costs involved and all the required properties for successful vessel service. However, experimental inter-relations of solidification thermal parameters, ...