Search
Now showing items 11-20 of 21
Fadiga de aços TWIP de baixa densidade produzidos por conformação por spray e forjamento rotativo.
(Universidade Federal de São Carlos, 2020-02-19)
The present study evaluated the mechanical properties in monotonic and
cyclic stress of two low-density steel designed by thermodynamic calculations
aiming stacking fault energy values that would allow different plasticity ...
Biomimetism of Brazil nutshell (Bertholletia excelsa)
(Universidade Federal de São Carlos, 2020-08-07)
For thousands of years, nature has accumulated countless possibilities for optimized
solutions to engineering problems using limited raw material, room temperature,
aqueous solutions, solar energy and renewable resources. ...
Influence of Bobbin Tool Friction Stir Welding (BT-FSW) variants on the microstructure and properties of AA2060 and AA2196 aluminum alloys
(Universidade Federal de São Carlos, 2020-06-18)
In order to reduce total costs in aircrafts production, operation and maintenance, materials and processing techniques have been continuously further optimized. In this scenario, aluminum-lithium alloys have been studied ...
Equilíbrio de fases e propriedades mecânicas da liga de elemento multiprincipal Cr40Co40Ni20
(Universidade Federal de São Carlos, 2021-02-19)
In the pursuit for materials with improved performance, multi-principal element alloys (MPEAs) attract the interest of the scientific community, due to their large composition space. Some Cr-Co-Ni alloys stand out with ...
Estudo termodinâmico, microrreológico e de propriedades mecânicas de blendas poliméricas ternárias com matriz de PCL
(Universidade Federal de São Carlos, 2020-08-31)
There is a demand for high quality materials that meet specific needs such as comfort, low cost and direct skin molding for making orthoses. This work aimed develop and identify some mechanical properties and the microrheology ...
Avaliação das microestruturas de solidificação e propriedades de aplicação de ligas monotéticas Al-Bi, Al-Bi-Cu e Al-Bi-Zn
(Universidade Federal de São Carlos, 2021-06-16)
Monotectic Al-based ternary alloys can result in a good combination of wear resistance and mechanical strength. While the soft self-lubricating elements contribute to an appropriate wear resistance, modification with third ...
Evolução microestrutural e propriedades mecânicas das ligas Al-10%Si-0,45%Mg e Al-10%Si-1,0%Mg
(Universidade Federal de São Carlos, 2021-07-28)
Al-Si alloys with high silicon (Si) content are widely used in aerospace, automotive, microelectronics, among others. In this context, the Al-10 wt.% Si alloys with the addition of Magnesium (Mg) are alternatives that ...
Levantamento de correlações de solidificação da liga A356 para aplicação em simulação computacional e projetos de rodas automotivas
(Universidade Federal de São Carlos, 2024-02-27)
Wheels are safety items with high structural demand. AlSi alloys stand out due to their good ratio between density and strength. The use of A356 alloy processed by Low-Pressure Die Casting (LPDC) and T6 heat treatment ...
Vitrocerâmicas de silicato de lítio com gradientes microestruturais - simulações e experimentos
(Universidade Federal de São Carlos, 2022-08-08)
The microstructure of glass-ceramics (GCs) depends on their chemical
composition and thermal history, from the cooling of the precursor glass to the
heat treatments. In glass production, the cooling rate on the surface ...
Microestrutura e propriedades mecânicas da liga Al7SiMg contaminada com 2,8%Fe e processada por fusão seletiva a laser
(Universidade Federal de São Carlos, 2022-06-28)
The solidification kinetics imposed by Selective Laser Melting (SLM) leads the microstructure of the manufactured metallic components to present intrinsic characteristics such as: microstructural and phase refinement, ...