Buscar
Mostrando ítems 41-50 de 58
Refill friction stir spot welding: investigation of the similar and dissimilar welding of AA5754-H22 and AA6061-T6 sheets
(Universidade Federal de São Carlos, 2019-06-03)
The automotive industry is shifting to a new paradigm of material utilization in vehicles. Different parts of the car structural body are increasingly being made of materials selected to have a customized performance ...
Biomimetism of Brazil nutshell (Bertholletia excelsa)
(Universidade Federal de São Carlos, 2020-08-07)
For thousands of years, nature has accumulated countless possibilities for optimized
solutions to engineering problems using limited raw material, room temperature,
aqueous solutions, solar energy and renewable resources. ...
Correlações entre propriedades dinâmico-mecânicas e durabilidade sob fadiga mecânica em compósitos de polipropileno/polipropileno maleificado/fibra de vidro
(Universidade Federal de São Carlos, 2006-09-06)
Although the influence of interfacial adhesion on short-term mechanical
performance of fiber-reinforced thermoplastic composites has been well
established, very little published information is available on the influence ...
Deformação em canal angular de uma liga Al-4%Cu: efeito dos mecanismos de endurecimento na resistência mecânica e ductilidade
(Universidade Federal de São Carlos, 2011-03-03)
Internal boundaries hardening and precipitation hardening are two important mechanisms acting in metallic alloys. The former has special relevance when the grain size is reduced ...
Influence of Bobbin Tool Friction Stir Welding (BT-FSW) variants on the microstructure and properties of AA2060 and AA2196 aluminum alloys
(Universidade Federal de São Carlos, 2020-06-18)
In order to reduce total costs in aircrafts production, operation and maintenance, materials and processing techniques have been continuously further optimized. In this scenario, aluminum-lithium alloys have been studied ...
Mechanical properties and metallurgical characterization of AA6082-T6 alloy welded by refill friction stir spot welding
(Universidade Federal de São Carlos, 2019-07-30)
The efforts to produce automobiles with intense use of aluminum alloys is growing and the 6XXX series of aluminum alloys are important for this scenario. However, the current joining technologies applied in these alloys ...
Correlação entre morfologia, percolação elétrica e propriedades mecânicas de compósitos da blenda PLA/PBS com grafite expandido
(Universidade Federal de São Carlos, 2013-12-06)
In recent years, researchers from industry and universities have focused
their interests in polymer nanocomposites, especially in multifunctional
composites. The composites made from nano expanded graphite ( nGE ) ...
Equilíbrio de fases e propriedades mecânicas da liga de elemento multiprincipal Cr40Co40Ni20
(Universidade Federal de São Carlos, 2021-02-19)
In the pursuit for materials with improved performance, multi-principal element alloys (MPEAs) attract the interest of the scientific community, due to their large composition space. Some Cr-Co-Ni alloys stand out with ...
Estudo termodinâmico, microrreológico e de propriedades mecânicas de blendas poliméricas ternárias com matriz de PCL
(Universidade Federal de São Carlos, 2020-08-31)
There is a demand for high quality materials that meet specific needs such as comfort, low cost and direct skin molding for making orthoses. This work aimed develop and identify some mechanical properties and the microrheology ...
Avaliação das microestruturas de solidificação e propriedades de aplicação de ligas monotéticas Al-Bi, Al-Bi-Cu e Al-Bi-Zn
(Universidade Federal de São Carlos, 2021-06-16)
Monotectic Al-based ternary alloys can result in a good combination of wear resistance and mechanical strength. While the soft self-lubricating elements contribute to an appropriate wear resistance, modification with third ...