Buscar
Itens para a visualização no momento 1-10 of 57
Desenvolvimento de vitrocerâmicos transparentes resistentes ao impacto
(Universidade Federal de São Carlos, 2021-11-11)
Transparent glass-ceramics (GCs) can replace glasses traditionally used as ballistic windows and electronic displays due to their better mechanical properties. This improvement is obtained by the crystallization of phases ...
Efeito do teor de titânio no endurecimento por precipitação em uma liga à base de Co-Ni e consequências nas propriedades mecânicas
(Universidade Federal de São Carlos, 2021-04-19)
The alloy subject of this study, designated by the Unified Numbering System,
R30035 and internationally known as MP35N®, is a 35 Ni – 33.5 Co – 20.5 Cr – 9.5
Mo alloy with very-high mechanical strength, ductility, and ...
Design, production and advanced characterization of CoCrFeMnNi-based medium- and high-entropy alloys: understanding the interplay with composition, microstructure, and mechanical properties
(Universidade Federal de São Carlos, 2024-04-12)
Worldwide, a great research effort is being employed in the development of Medium/high entropy alloys (M/HEAs). Among the M/HEAs produced to date, great emphasis is given to the equiatomic Co20Cr20Fe20Mn20Ni20 (at.%) alloy ...
Soldagem por ponto por fricção das ligas de alumínio 5A06-O/2219-T87: caracterização mecânica e microestrutural
(Universidade Federal de São Carlos, 2022-11-30)
Refill Friction Stir Spot Welding (RFSSW) is a solid-state joining technique for welding dissimilar and similar materials applied to light alloys and thermoplastics. Thus, the purpose of this work was to evaluate the ...
Produção e caracterização de ligas Al-(3, 5, 10)Mg-0,1Sc por solidificação direcional e refusão superficial a laser
(Universidade Federal de São Carlos, 2024-04-22)
The present study involved the investigation of the Al-3, -5, and -10% Mg-0.1% Sc alloys processed either by Directional Solidification (DS) or Laser Surface Remelting (LSR), as well as correlating the corresponding ...
Design de aços inoxidáveis austeníticos de alto teor de nitrogênio via triagem de alto desempenho por método CALPHAD
(Universidade Federal de São Carlos, 2023-07-21)
Nickel is essential for austenitic stainless steels of the 3xx class (8-10 wt%) due to its austenitizing character. However, its notorious price volatility directly affects the stainless steel industry. In light of this, ...
Trincamento induzido por hidrogênio em aços inoxidáveis supermartensíticos modificados pela ação de boro para aplicação em exploração de petróleo em águas profundas
(Universidade Federal de São Carlos, 2015-09-21)
The oil exploitation and production in deep water involves drilling risers with over 7 km deep. In this condition, the environments found in such wells are too adverse, acting under the exploration and production equipment, ...
Influência das condições de processamento na morfologia e das propriedades mecânicas de sistemas poliméricos moldados por injeção e sua predição através de redes neurais artificiais.
(Universidade Federal de São Carlos, 2004-08-12)
The influence of the injection molding parameters on the morphology and mechanical properties of poly(phenylene sulfide), PPS, and of a 80/20(%wt) blend of PPS/block copolymer styrene-ethylene-butylene-styrene ,SEBS, ...
Análise comparativa de fadiga mecânica em compósitos de polipropileno com talco e com nanoargila
(Universidade Federal de São Carlos, 2010-05-17)
Talc is a well known lamellar mineral filler much used for mechanical reinforcement of polypropylene (PP) composites. Mineral nanoclay is also a lamellar filler that is gaining much interest due to its reinforcement effect ...
Estudo das propriedades mecânicas de cabos condutores elétricos de tipo CAA usados e sua adequação ao retracionamento.
(Universidade Federal de São Carlos, 2005-10-24)