Buscar
Itens para a visualização no momento 31-40 of 85
Compósitos de nanofibrilas de celulose de bagaço de cana-de-açúcar e nanopartículas lamelares: caracterização de dispersões, filmes e filamentos
(Universidade Federal de São Carlos, 2023-02-27)
Cellulosic materials have great importance for industry and scientific research due to their availability, thermomechanical properties, biocompatible aspects and advantages for circular economy strategies and prioritization ...
Avaliação de corrosão sob tensão e corrosão-fadiga do aço API 5L X70 em solução etanólica sintética
(Universidade Federal de São Carlos, 2022-04-07)
API X70 steel has been widely used in Brazil for the manufacture of ethanol transport pipelines, however, a recognized problem in carbon steel pipes exposed to ethanol is stress corrosion cracking (SCC) and, in addition, ...
Influência da adição de cério na microestrutura e comportamento de oxidação de aços inoxidáveis Fe-Mn-Si-Cr-Ni com efeito de memória de forma
(Universidade Federal de São Carlos, 2020-01-15)
In this study, the influence of small cerium additions on the microstructure and
oxidation behavior of Fe-Mn-Si-Cr-Ni shape memory stainless steels (SMSSs)
was investigated. The results show that the Ce addition in the ...
Estabilidade e habilidade de formação de vidros óxidos
(Universidade Federal de São Carlos, 2020-03-02)
The glass-forming ability (GFA) is a measure of the easiness of vitrification of a liquid during cooling from the liquidus temperature. The GFA is inversely proportional to the critical cooling rate (Rc), whose determination ...
Synthesis and graphitization of phenolic resins for carbon-containing refractory applications
(Universidade Federal de São Carlos, 2020-02-03)
Carbon-containing refractories’ (CCRs) present special chemical and thermomechanical properties, which depend on the presence of carbonaceous phase with a structure similar to those of graphite. However, phenolic resins ...
Desenvolvimento de biocompósitos de Poli (ácido láctico)/biocargas para impressão 3d de scaffolds para engenharia de tecidos ósseos
(Universidade Federal de São Carlos, 2020-08-11)
As life expectancy increases worldwide, there is an increased need for orthopedic procedures to repair bone defects resulting from trauma. In this context, new surgical procedures and bone repair materials, such as scaffolds ...
Biomimetism of Brazil nutshell (Bertholletia excelsa)
(Universidade Federal de São Carlos, 2020-08-07)
For thousands of years, nature has accumulated countless possibilities for optimized
solutions to engineering problems using limited raw material, room temperature,
aqueous solutions, solar energy and renewable resources. ...
Otimização da condutividade iônica de vitrocerâmicas condutoras por íon sódio: controle microestrutural e busca de novas composições
(Universidade Federal de São Carlos, 2020-04-03)
Sodium-based materials are promising candidates for manufacturing stationary storage devices such as batteries due to their low cost and the Na high redox potential. However, the corrosion, flammability, and the degradation ...
Estudo sistemático da condutividade iônica de vitrocerâmicas NASICON: influência de tratamentos isotérmicos e novas substituições iônicas
(Universidade Federal de São Carlos, 2020-09-24)
The synthesis of solid electrolytes and the optimization of their ionic conductivity are topics of scientific interest since these components are essential for the current density and the half-life of the sodium batteries. ...
Cerâmicas refratárias macroporosas derivadas de espumas ultraestáveis estabilizadas com partículas cerâmicas
(Universidade Federal de São Carlos, 2020-11-03)
Innovation on materials for heat conservation in high-temperature industrial
processes is seen as an important strategy for Energy Efficiency. Fundamental
studies can support the development of these materials and the ...