Search
Now showing items 11-20 of 84
Produção e caracterização de ligas Al-(3, 5, 10)Mg-0,1Sc por solidificação direcional e refusão superficial a laser
(Universidade Federal de São Carlos, 2024-04-22)
The present study involved the investigation of the Al-3, -5, and -10% Mg-0.1% Sc alloys processed either by Directional Solidification (DS) or Laser Surface Remelting (LSR), as well as correlating the corresponding ...
Caracterização óptica on-line das misturas dispersiva e distributiva na extrusão dupla rosca
(Universidade Federal de São Carlos, 2022-12-14)
In this work, the effect of different kneading blocks on the dispersive and distributive mixing levels of a diluted PS/PA6 mixture along the screw profile of a twin-screw extruder was investigated via online monitoring of ...
Injection overmolding of polycarbonate-aluminum alloys hybrid structures
(Universidade Federal de São Carlos, 2023-03-24)
Overlap joints between polycarbonate (PC) and aluminum alloys AA6061 and AlSi10Mg were manufactured by injection overmolding and evaluated regarding the interfacial structure and mechanical performance. The injection ...
Synthesis and characterization of CH3NH3SnI3, Mn doped CH3NH3SnI3 and oxygen-deficient TiO2 as visible-light active semiconductors
(Universidade Federal de São Carlos, 2020-02-14)
CH3NH3SnI3 is an environmentally-friendly (lead-free) perovskite whose synthesis depends on SnI2. Some disadvantages of SnI2 include high cost and tin(IV) contamination. Thus, SnSO4 and C16H30O4Sn are presented as cheaper ...
Efeito do inoculante Al-Nb-B na microestrutura e propriedades mecânicas da liga AA2017 fabricada por fusão em leito de pó a laser
(Universidade Federal de São Carlos, 2023-01-24)
The blending of finer powders of Ti, Zr, Ta, Sc, and Nb compounds as inoculants has been a promising strategy to modify precipitation-hardened aluminum alloys for laser-based powder bed fusion process (L-PBF), promoting a ...
Desenvolvimento de sensores colorimétricos baseados em compostos amido/cera de abelha e antocianinas por casting contínuo para embalagens inteligentes
(Universidade Federal de São Carlos, 2023-12-19)
Intelligent packaging are systems capable of communicating the conditions of the packed food and different approaches can be used to produce such packaging, for instance, the production of quality indicators based on ...
Microstructure, corrosion, and wear resistance of a boron-modified duplex stainless steel produced by laser powder bed fusion
(Universidade Federal de São Carlos, 2024-03-18)
A duplex stainless steels (DSS) containing 0.3 and 0.6 wt.% of boron were produced by laser powder bed fusion (L-PBD) with parameters based on Box-Behnken design. The microstructure was evaluated by XRD, OM, SEM, EBSD, ...
Design de ligas multicomponentes do sistema Ti-V-Nb-M (M = Cr, Co E Ni) para armazenagem de hidrogênio
(Universidade Federal de São Carlos, 2023-05-15)
Body Centered Cubic (BCC) multicomponent alloys have gained attention in the research of materials for H2 storage. These alloys have the potential to optimize H2 storage properties via compositional control. However, the ...
Influência da nióbia no óxido de alumínio eletrofundido para aplicações abrasivas
(Universidade Federal de São Carlos, 2021-07-29)
Abrasives are materials that have as main characteristics their cutting and
grinding power. In its most common crystalline form, aluminum oxide, due to its
high melting point, high hardness and mechanical resistance, ...
Detector óptico NIR in-line para monitoramento da degradação termomecânica do polipropileno durante a extrusão
(Universidade Federal de São Carlos, 2022-05-02)
The present research aimed to develop an in-line NIR (near infrared) optical detector to monitor polypropylene (PP) thermomechanical degradation during extrusion. The optical detector monitors, in real time, the absorbance ...