Buscar
Mostrando ítems 31-40 de 67
Identificação dos parâmetros do modelo de Drucker-Prager/CAP para estudo da densificação mecânica de alumina atomizada
(Universidade Federal de São Carlos, 2019-06-27)
Pressing followed by sintering is among the most versatile materials processing
routes and suits different classes of materials: ceramic, polymeric and metallic.
In the last decade, this processing route has been gaining ...
Concretos refratários avançados contendo nano-óxidos produzidos pelo Método Pechini
(Universidade Federal de São Carlos, 2018-06-06)
Recently there is a great effort to use the benefits of nanometric powders additions in the matrices of advanced refractory concretes of ; low (LC), ultra low (ULC) and no cement (NC) refractory concretes, in order to make ...
Estabilidade e habilidade de formação de vidros óxidos
(Universidade Federal de São Carlos, 2020-03-02)
The glass-forming ability (GFA) is a measure of the easiness of vitrification of a liquid during cooling from the liquidus temperature. The GFA is inversely proportional to the critical cooling rate (Rc), whose determination ...
Synthesis and graphitization of phenolic resins for carbon-containing refractory applications
(Universidade Federal de São Carlos, 2020-02-03)
Carbon-containing refractories’ (CCRs) present special chemical and thermomechanical properties, which depend on the presence of carbonaceous phase with a structure similar to those of graphite. However, phenolic resins ...
Desenvolvimento de biocompósitos de Poli (ácido láctico)/biocargas para impressão 3d de scaffolds para engenharia de tecidos ósseos
(Universidade Federal de São Carlos, 2020-08-11)
As life expectancy increases worldwide, there is an increased need for orthopedic procedures to repair bone defects resulting from trauma. In this context, new surgical procedures and bone repair materials, such as scaffolds ...
Desenvolvimento de cerâmicas refratárias engenheiradas densas e porosas
(Universidade Federal de São Carlos, 2019-09-04)
High temperature processes are of great importance as they are widely applied in the manufacture of commodities, consumer goods and advanced materials. For these processes to be possible, the thermal environment in which ...
Biomimetism of Brazil nutshell (Bertholletia excelsa)
(Universidade Federal de São Carlos, 2020-08-07)
For thousands of years, nature has accumulated countless possibilities for optimized
solutions to engineering problems using limited raw material, room temperature,
aqueous solutions, solar energy and renewable resources. ...
Desenvolvimento de compósitos poliméricos flexíveis com alta constante dielétrica obtidos a partir de polímeros baseados em pvdf e da perovskita ncbcto
(Universidade Federal de São Carlos, 2018-12-19)
The objective of this thesis was to produce polymer/perovskite based composites to be used as supercapacitors; the composites were made by incorporating an specified type of perovskite (Na1/3Ca1/3Bi1/3Cu3Ti4O12, NCBCTO) ...
Estudo da obtenção de nitreto de boro hexagonal por rotas de síntese assistidas por micro-ondas
(Universidade Federal de São Carlos, 2018-02-05)
Boron nitride (h-BN) is an attractive ceramic material that combines
excellent thermal, electrical and chemical properties. The combination of these
properties makes h-BN useful in the manufacturing of lubricants, ...
Effect of structural singularities on superwettability of SiO₂-based coatings
(Universidade Federal de São Carlos, 2019-11-07)
A detailed study on the correlation between structural singularities and wettability of neat and chemically modified coatings prepared from layer-by-layer (LbL) assembled silica nanoparticles (SiO₂) was performed. ...