Search
Now showing items 221-230 of 273
Estudo da indução da grafitização da resina fenólica fenol/formaldeído
(Universidade Federal de São Carlos, 2019-08-14)
Among the probable carbon sources, there are the polymers, as the phenolic resin, which produces residual carbon around 60% wt./wt. after thermal treatment. It is classified as non-graphitizable, because it has not graphitic ...
Cerâmicas refratárias macroporosas derivadas de espumas ultraestáveis estabilizadas com partículas cerâmicas
(Universidade Federal de São Carlos, 2020-11-03)
Innovation on materials for heat conservation in high-temperature industrial
processes is seen as an important strategy for Energy Efficiency. Fundamental
studies can support the development of these materials and the ...
Design of high entropy alloys for hydrogen storage: study of the Mg-V-Al-Cr-Ni, Mg-Al-Ti-Mn-Nb and Ti-V-Nb-Cr systems
(Universidade Federal de São Carlos, 2021-05-21)
The advent of high entropy alloys (HEA) has brought new opportunities and challenges to metallurgy. Due to extensive compositional field of HEAs, the possibility of controlling properties in a composition-driven approach ...
Development of ionic conductive cellulose mat by solution blow spinning and laser-induced graphene from pineapple nanocellulose for use in flexible electronic devices
(Universidade Federal de São Carlos, 2021-02-26)
In the face of environmental issues and aiming at electronic devices of
rapid production at low cost, this doctoral thesis proposed two new and
innovative approaches to obtain substrates, dielectrics, and electrodes from ...
Conductive polymers derived heteroatom doped carbon catalysts for oxygen reduction reaction
(Universidade Federal de São Carlos, 2020-12-02)
Fuel cell is an electrochemical energy conversion system, that holds the
promise for clean and sustainable energy source. During the operation, this
device generates electricity direct from electrochemical reactions ...
Influência da adição de cério na resistência à corrosão e efeito de memória de forma em ligas Fe-Mn-Si-Cr-Ni-(Ce)
(Universidade Federal de São Carlos, 2020-09-03)
The interest in scientific and technological development of Fe-Mn-Si-Cr-Ni shape memory alloys is increasing in the last years. The improvement of key properties of theses alloys should enable its use in different applications, ...
Study of bioactivity, corrosion resistance and fatigue behavior of Ti-12Mo-6Zr-2Fe alloy after different surface treatments
(Universidade Federal de São Carlos, 2020-11-19)
Demand for new implants with improved bioactivity, corrosion resistance, and optimal mechanical properties has been increasing considerably. In this sense, different surface treatments are applied in titanium alloys to ...
Mineração de textos de patentes para monitoramento tecnológico, identificação de aplicações e seleção de materiais: estudo de caso em desenvolvimentos de aços
(Universidade Federal de São Carlos, 2020-11-26)
The growing number of options in materials leads to increasing complexity of the process to select the most suitable to perform a function in a product or to choose a competitive application for a newly developed material. ...
Crack network monitoring upon curing and drying of high-alumina MgO-containing refractory castable via digital image correlation
(Universidade Federal de São Carlos, 2020-12-23)
MgO particles are added to high-alumina refractory castable formulations to
form spinel at high temperatures. However, these particles react with water forming brucite, which causes heterogeneous expansions in the material ...
Estudo de massas de porcelanato esmaltado contendo filito como fundente
(Universidade Federal de São Carlos, 2020-12-17)
The production of ceramic tiles is growing worldwide and Brazil is the third-largest producer in the world. Porcelain tiles represent a significant fraction of this production and the trend is for significant growth in the ...