Buscar
Mostrando ítems 81-90 de 273
Deformação da fase dispersa e degradação de blendas poliméricas em extrusora dupla-rosca aberta e fechada
(Universidade Federal de São Carlos, 2011-09-05)
In order to obtain flexibility of the processing in a twin-screw extruder and operate it as an internal mixer, the second phase dispersion and deformation and degradation were analyzed during processing in an open and ...
Seleção de ligas com alta tendência de formação de estrutura amorfa
(Universidade Federal de São Carlos, 2007-03-08)
The understanding of the law that explain why certain alloys form amorphous
structure by cooling the molten melt under cooling rates lower than others alloys
remains as one of the great challenges of the materials science ...
Influência da nióbia no óxido de alumínio eletrofundido para aplicações abrasivas
(Universidade Federal de São Carlos, 2021-07-29)
Abrasives are materials that have as main characteristics their cutting and
grinding power. In its most common crystalline form, aluminum oxide, due to its
high melting point, high hardness and mechanical resistance, ...
Detector óptico NIR in-line para monitoramento da degradação termomecânica do polipropileno durante a extrusão
(Universidade Federal de São Carlos, 2022-05-02)
The present research aimed to develop an in-line NIR (near infrared) optical detector to monitor polypropylene (PP) thermomechanical degradation during extrusion. The optical detector monitors, in real time, the absorbance ...
Estabilidade microestrutural da liga Cu-0,8Cr-0,07Zr após extrusão em canal angular em temperatura criogênica
(Universidade Federal de São Carlos, 2021-12-20)
Severe Plastic Deformation (SPD) are well established routes with regard to the
intense microstructural refining of metals and alloys up to the submicrometer (<
1 μm) and/or nanometer (< 100 nm) scales. Lowering the ...
Estudo da influência de contraíons nas propriedades eletroquímicas, eletromecânicas e térmicas de compósito polímero ionomérico metal (IPMC) de Náfion®/Pt
(Universidade Federal de São Carlos, 2022-06-21)
In the field of soft actuators, ionomeric polymer metal composite like devices
(IPMCs) are a trend, as they display great displacement when a low electric
potential is applied. Its work mechanism is related to the migration ...
Monitoramento in/on-line da malaxagem na extrusão: hidrólise e extensão de cadeia do poli(tereftalato de etileno) e fusão do polipropileno
(Universidade Federal de São Carlos, 2020-08-14)
During twin-screw extrusion, understanding and quantifying the behaviour of molten polymers under different conditions is limited by the complex configuration of the equipment. Due to this fact, real-time extrusion monitoring ...
Influência da incorporação de negro de fumo e carbonato de cálcio micro e nanoparticulado nas propriedades reológicas, colorimétricas e mecânicas de filmes de polietileno de baixa densidade
(Universidade Federal de São Carlos, 2021-06-30)
In this work, the influence of incorporation of Carbon Black (CB) and CaCO3, both with different particle sizes, on the rheological, colorimetric and mechanical properties of LDPE films were studied. Three different types ...
Estudo de Ligas Fe-Nb-B Nanocristalinas Eutéticas Ultrafinas e Laser Cladding de Pós Atomizados
(Universidade Federal de São Carlos, 2020-05-20)
Fe-Nb-B alloys have gained much attention in recent years because of the possibility to obtain different constituents in nanostructured composites, amorphous and ultrafine eutectics (scale of 100 nm to 1 μm) alloys depending ...
Obtenção de quitosana reticulada por processamento termomecânico para aplicações biomédicas
(Universidade Federal de São Carlos, 2022-05-11)
The low processability of chitosan and the obtaining of materials with low structural stability constitute substantial limitations to the commercial use of chitosan, especially in biomedical applications. Furthermore, the ...