Buscar
Itens para a visualização no momento 201-210 of 273
Biomimetism of Brazil nutshell (Bertholletia excelsa)
(Universidade Federal de São Carlos, 2020-08-07)
For thousands of years, nature has accumulated countless possibilities for optimized
solutions to engineering problems using limited raw material, room temperature,
aqueous solutions, solar energy and renewable resources. ...
Síntese in situ pelo método Pechini e sinterização por métodos não convencionais de compósitos magnetoelétricos particulados
(Universidade Federal de São Carlos, 2015-11-27)
This thesis aimed the synthesis via in situ by Pechini method and the sintering by conventional and unconventional methods (microwave and spark-plasma) of particulates magnetoelectrics composites (ME) of ferroelectric ...
O uso de um vidro altamente bioativo para conferir bioatividade à superfície do titânio: desenvolvimento de um método para recobrimentos descontínuos
(Universidade Federal de São Carlos, 2013-03-15)
Bioactive glasses - or glass-ceramics, exhibit the largest known bioactivity index due to their osteoinductive property - among others. Theirs bonding to bone is also one of the strongest known, but they have poor mechanical ...
Resistência à fadiga de junta circunferencial de um tubo API 5L x 70 em contato com etanol
(Universidade Federal de São Carlos, 2016-09-19)
Circumferential field-welding joints of oil pipelines are susceptible to defects that may lead to failures when in operation. The type of product to be transported is an important factor in the evaluation of environment-induced ...
Obtenção e caracterização estrutural, microestrutural e elétrica do condutor protônico BaCe1-xYxO3-δ com e sem aditivo de sinterização
(Universidade Federal de São Carlos, 2016-12-19)
The study of solid electrolytes (SE) is important to the scientific and technological development of materials used in application related to clean energy generation, such as Solid Oxide Fuel Cells (SOFCs). Yttrium-doped ...
Desenvolvimento de compósitos poliméricos flexíveis com alta constante dielétrica obtidos a partir de polímeros baseados em pvdf e da perovskita ncbcto
(Universidade Federal de São Carlos, 2018-12-19)
The objective of this thesis was to produce polymer/perovskite based composites to be used as supercapacitors; the composites were made by incorporating an specified type of perovskite (Na1/3Ca1/3Bi1/3Cu3Ti4O12, NCBCTO) ...
Estudo da obtenção de nitreto de boro hexagonal por rotas de síntese assistidas por micro-ondas
(Universidade Federal de São Carlos, 2018-02-05)
Boron nitride (h-BN) is an attractive ceramic material that combines
excellent thermal, electrical and chemical properties. The combination of these
properties makes h-BN useful in the manufacturing of lubricants, ...
Otimização da condutividade iônica de vitrocerâmicas condutoras por íon sódio: controle microestrutural e busca de novas composições
(Universidade Federal de São Carlos, 2020-04-03)
Sodium-based materials are promising candidates for manufacturing stationary storage devices such as batteries due to their low cost and the Na high redox potential. However, the corrosion, flammability, and the degradation ...
Estudo de ligas Ti-Nb-Zr e Ti-Nb-Mg, fundidas e na forma de recobrimentos sobre aço inoxidável, para aplicações biomédicas
(Universidade Federal de São Carlos, 2019-10-31)
In the present thesis, nanostructured coatings of Ti (100 - (20 + z)) -Nb20-Xz alloys (X = Zr and Mg) were produced by sputtering. So with that, it was possible to analyze the effect of the addition of Zr and Mg on the ...
Caracterização e avaliação de filmes metálicos para uso em ultra-alto vácuo
(Universidade Federal de São Carlos, 2007-11-27)
The construction of ultra-high vacuum chambers (UHV) for particle accelerators demands pressure in the range of 10-8 Pa, and this is particularly difficult to achieve in chambers with the length to traverse section rate ...