Buscar
Mostrando ítems 1-10 de 22
Desenvolvimento de ligas de alumínio recicladas contendo a fase primária Al(Fe,TM)Si aproximante de quasicristal: controle da microestrutura visando aplicações tribológicas e mecânicas
(Universidade Federal de São Carlos, 2021-01-19)
Iron is the most common and harmful impurity to the mechanical properties of casting Al-7Si-3Cu alloys, which are widely used in the automotive industry. Due to the economic and environmental advantages of recycling, there ...
Efeito da microadição de oxigênio na estabilidade microestrutural da liga Ti-29Nb-13Ta-4,6Zr processada via deformação plástica severa e envelhecimento
(Universidade Federal de São Carlos, 2021-02-24)
Gum Metal corresponds to a family of β-Ti alloys that are currently receiving great attention due to its outstanding properties such as low elastic modulus, superelasticity, and high tensile strength. These alloys show ...
Influência da nióbia no óxido de alumínio eletrofundido para aplicações abrasivas
(Universidade Federal de São Carlos, 2021-07-29)
Abrasives are materials that have as main characteristics their cutting and
grinding power. In its most common crystalline form, aluminum oxide, due to its
high melting point, high hardness and mechanical resistance, ...
Estabilidade microestrutural da liga Cu-0,8Cr-0,07Zr após extrusão em canal angular em temperatura criogênica
(Universidade Federal de São Carlos, 2021-12-20)
Severe Plastic Deformation (SPD) are well established routes with regard to the
intense microstructural refining of metals and alloys up to the submicrometer (<
1 μm) and/or nanometer (< 100 nm) scales. Lowering the ...
Influência da incorporação de negro de fumo e carbonato de cálcio micro e nanoparticulado nas propriedades reológicas, colorimétricas e mecânicas de filmes de polietileno de baixa densidade
(Universidade Federal de São Carlos, 2021-06-30)
In this work, the influence of incorporation of Carbon Black (CB) and CaCO3, both with different particle sizes, on the rheological, colorimetric and mechanical properties of LDPE films were studied. Three different types ...
Ligas multicomponentes do sistema Ti33Cr37V30-xNbx (X: 0, 5, 10 e 15) para armazenamento de hidrogênio
(Universidade Federal de São Carlos, 2021-11-30)
The use of metal hydrides is a competitive alternative to hydrogen storage in liquid or gaseous states. Metallic alloys based on the TiCrV system have attractive hydrogen storage characteristics compared with those of the ...
Design of high entropy alloys for hydrogen storage: study of the Mg-V-Al-Cr-Ni, Mg-Al-Ti-Mn-Nb and Ti-V-Nb-Cr systems
(Universidade Federal de São Carlos, 2021-05-21)
The advent of high entropy alloys (HEA) has brought new opportunities and challenges to metallurgy. Due to extensive compositional field of HEAs, the possibility of controlling properties in a composition-driven approach ...
Avaliação das microestruturas de solidificação e propriedades de aplicação de ligas monotéticas Al-Bi, Al-Bi-Cu e Al-Bi-Zn
(Universidade Federal de São Carlos, 2021-06-16)
Monotectic Al-based ternary alloys can result in a good combination of wear resistance and mechanical strength. While the soft self-lubricating elements contribute to an appropriate wear resistance, modification with third ...
Avaliação da anomalia da teoria de nucleação clássica em vidros silicatos
(Universidade Federal de São Carlos, 2021-07-13)
Under some conditions, the Classical Nucleation Theory (CNT) provides a good description of the temperature dependence of the experimental homogeneous nucleation rates in supercooled liquids. Allegedly, however, it strongly ...
Método de controle de trajetória de atuadores ipmc baseados em nafion® utilizando técnica de visão de máquina em ambiente com umidade relativa controlada
(Universidade Federal de São Carlos, 2021-08-13)
Ionomeric polymer-metal composites (IPMC) consist of an electroactive polymeric matrix coated on both sides with a noble metal. When applying an electrical potential difference, the polymeric membrane changes its thickness, ...