Search
Now showing items 91-99 of 99
Estudo de Ligas Fe-Nb-B Nanocristalinas Eutéticas Ultrafinas e Laser Cladding de Pós Atomizados
(Universidade Federal de São Carlos, 2020-05-20)
Fe-Nb-B alloys have gained much attention in recent years because of the possibility to obtain different constituents in nanostructured composites, amorphous and ultrafine eutectics (scale of 100 nm to 1 μm) alloys depending ...
Influência da incorporação de negro de fumo e carbonato de cálcio micro e nanoparticulado nas propriedades reológicas, colorimétricas e mecânicas de filmes de polietileno de baixa densidade
(Universidade Federal de São Carlos, 2021-06-30)
In this work, the influence of incorporation of Carbon Black (CB) and CaCO3, both with different particle sizes, on the rheological, colorimetric and mechanical properties of LDPE films were studied. Three different types ...
Comportamento de oxidação em temperaturas elevadas de ligas NiTiNb com efeito memória de forma
(Universidade Federal de São Carlos, 2021-09-10)
Shape memory alloys (SMA) of the Nickel-Titanium (NiTi) system are currently the most commercially important, due to their excellent mechanical properties, high shape recovery and biocompatibility. Such a unique set of ...
Monitoramento in/on-line da malaxagem na extrusão: hidrólise e extensão de cadeia do poli(tereftalato de etileno) e fusão do polipropileno
(Universidade Federal de São Carlos, 2020-08-14)
During twin-screw extrusion, understanding and quantifying the behaviour of molten polymers under different conditions is limited by the complex configuration of the equipment. Due to this fact, real-time extrusion monitoring ...
Computational modeling of rubber multiaxial pressing applied to ceramic materials
(Universidade Federal de São Carlos, 2021-04-07)
Uniaxial and isostatic powder pressing are well known processes. However, disadvantages such as the production of heterogeneous parts or low productivity, respectively, are intrinsic drawbacks. Rubber Multiaxial Pressing ...
Caracterização de interfaces para aplicações em ultra-alto vácuo através de brasagem dissimilar entre nitreto de boro hexagonal (h-BN), a liga de adição Ag-Cu-Ti e o Mo metálico
(Universidade Federal de São Carlos, 2020-08-14)
This work aimed to evaluate the vacuum brazing of h-BN/Mo systems for fabrication of the BPM (Beam Position Monitor) in synchrotron radiation beam. The h-BN has low surface wettability and is difficult to weld. The materials ...
Efeito do teor de titânio no endurecimento por precipitação em uma liga à base de Co-Ni e consequências nas propriedades mecânicas
(Universidade Federal de São Carlos, 2021-04-19)
The alloy subject of this study, designated by the Unified Numbering System,
R30035 and internationally known as MP35N®, is a 35 Ni – 33.5 Co – 20.5 Cr – 9.5
Mo alloy with very-high mechanical strength, ductility, and ...
Estudo da cinética de cristalização não-isotérmica de nanocompósitos de PLA/Haloisita
(Universidade Federal de São Carlos, 2021-08-27)
Poly(lactic acid) (PLA) is a biodegradable and biocompatible thermoplastic obtained from renewable sources and with similar properties when compared with petroleum-based polymers. The inclusion of nanoparticles is an ...
Desenvolvimento de vitrocerâmicos transparentes resistentes ao impacto
(Universidade Federal de São Carlos, 2021-11-11)
Transparent glass-ceramics (GCs) can replace glasses traditionally used as ballistic windows and electronic displays due to their better mechanical properties. This improvement is obtained by the crystallization of phases ...