Buscar
Mostrando ítems 21-30 de 30
Propriedades físicas e mecânicas da madeira de Angelim SP obtidas de árvores provenientes de regiões distintas do país
(Universidade Federal de São Carlos, 2021-05-24)
In Brazil, the use of wood in civil construction structures is regulated by the technical standard NBR-7190 "Wood Structures Project", of the Brazilian Association of Technical Standards (ABNT, 1997), which does not establish ...
Capacidade resistente de vigas celulares mistas à instabilidade no montante de alma
(Universidade Federal de São Carlos, 2021-06-07)
The present work aims to investigate the web post buckling resistance of composite cellular beams. For this task, geometrical and physical non-linear analyses are developed in the ABAQUS® software. The computational model ...
Verificação de pilares mistos de aço e concreto submetidos à flexão composta reta: curvas de interação M-N
(Universidade Federal de São Carlos, 2021-08-20)
Composite columns subjected to uniaxial bending moments are usually checked using normative recommendations, however, such checks do not include the use of high strength concretes. In this context, aiming to evaluate ...
Análise de vibrações em pisos mistos de aço e concreto induzidas por atividades rítmicas
(Universidade Federal de São Carlos, 2021-08-06)
The growing use of composite systems floors of steel and concrete in open spans design that aim to increase use flexibility of buildings using large open spaces, has stimulates the conception of composite systems floors ...
Estimativa da força de ruptura à punção em ligações laje-pilar interno sem armadura de cisalhamento de estruturas em concreto armado via modelos de regressão múltipla
(Universidade Federal de São Carlos, 2021-09-24)
The structural systems critical point of flat slabs happens on the connection slab-column through the shearing stressing concentrations which may lead to the punching phenomenon. According to the literature, there are ...
Avaliação da influência de revestimento em compósito cimentício dúctil e sustentável no reforço de alvenaria estrutural
(Universidade Federal de São Carlos, 2021-08-25)
This work aims to evaluate the use of a reinforcement system to strengthen structural masonry panels under vertical and lateral load. The reinforcement system is the Eco-friendly Ductile Cementitious Composite (EDCC). This ...
Contribuição ao estudo do comportamento estrutural de terças pré-fabricadas em concreto protendido sem armadura transversal
(Universidade Federal de São Carlos, 2021-07-12)
Purlins are thin beams made without transverse reinforcement and are used in the roofing of precast warehouses. The object of study of this research, were precast concrete purlins, which had been produced by a company in ...
Influência do valor médio do módulo de elasticidade à compressão paralela às fibras no projeto de treliças em madeira
(Universidade Federal de São Carlos, 2020-12-18)
In the evaluation of the service limit state, the Brazilian standard ABNT NBR 7190 (1997) recommends the adoption of the mean value of the elasticity module to compression in the direction parallel to grain (Ec0,m) for all ...
Avaliação da correlação entre propriedades colorimétricas e propriedades físico-mecânicas de madeiras tropicais
(Universidade Federal de São Carlos, 2021-10-01)
This work aimed to evaluate the use of colorimetric properties (L*, a* and b*) of the CIELAB system and apparent density as estimators of physical and mechanical properties of ten tropical wood species using quadratic ...
Análise do comportamento de sistemas estruturais em concreto moldado in loco sob o efeito do colapso progressivo
(Universidade Federal de São Carlos, 2020-02-21)
This work aims to investigate the behavior of cast-in-place reinforced concrete structures in the ultimate limit state of collapse. Progressive collapse is the disproportionate spread of a local failure due to the incidence ...