Search
Now showing items 1-10 of 19
Análise experimental da ligação entre placas de painéis sanduíches unidas com treliça metálica
(Universidade Federal de São Carlos, 2019-02-14)
ABSTRACT
A.KNONER, N Study on the stiffness between membranes and design of sandwich panels in reinforced concrete 2019. thesis (PhD) in structures and Civil Engineering-Federal University of São Carlos, São Carlos UFSCAr, ...
Diretrizes de projeto para desempenho térmico de sistemas de paredes pré-moldadas de concreto
(Universidade Federal de São Carlos, 2018-08-29)
The industrialized precast building systems have been used all over the world in housing construction since the 50’s. In Brazil, as there were no specific standard codes for precast panels until 2016, the use of those ...
Considerações sobre o projeto, cálculo e detalhamento de vigas pré-fabricadas protendidas com aderência inicial em pavimentos de edificações
(Universidade Federal de São Carlos, 2009-07-30)
This work shows a calculation sequence to determine and detail the longitudinal and transverse reinforcement of prestesses beams with pre-composed section. All procedures are done in a way that meets all the requirements ...
Estudo teórico-experimental de ligação viga-pilar com consolo metálico embutido em estruturas pré-moldadas de concreto
(Universidade Federal de São Carlos, 2013-02-14)
This study aimed to analyze the structural behavior of a beam-column connection with embedded steel member for precast concrete with no current use still in Brazil. Based on the literature review about hidden corbels found ...
Continuidade de painéis de laje alveolar em edifícios
(Universidade Federal de São Carlos, 2012-12-10)
The floors consist of hollow core slabs are being increasingly used in Brazil, because it can overcome large spans, have a low self-weight, allow fast assembly, require no shoring in many situations and are more economical ...
Sistema pré-fabricado para aplicação em construções provisórias de canteiros de obras
(Universidade Federal de São Carlos, 2014-05-23)
The use of prefabricated elements has become increasing in Brazil, This paper describes the study and the procedures for construction and erection of a building system works on a pavement. Within the concept of technological ...
Sistemas de contraventamento aplicados em estruturas pré-moldadas de concreto de múltiplos pavimentos
(Universidade Federal de São Carlos, 2015-08-25)
The use of precast concrete system in multi-storey buildings demand for structural solutions that enable its horizontal stability without implicating the architectural and economic aspects, its challenge is borne by the ...
Análise da segurança e saúde do trabalho em empresas de pré-fabricado de concreto utilizando princípios da engenharia de resiliência
(Universidade Federal de São Carlos, 2011-08-17)
The Safety and Health at Work (SHW) management is recognized as one of the main factors
so the enterprises may be able to fulfill their basic goals of coast, term and quality. One of the
latest management strategies is ...
Diretrizes para desenvolvimento de projeto para ligações de painéis de fachada horizontais de concreto pré-moldado
(Universidade Federal de São Carlos, 2009-03-03)
The increasing of using precast concrete panels, lack of standardization, lack of studies on precast concrete panels and its connections devices on Brazil, has led to the need of
manual and design criteria of precast ...
Considerações sobre projeto e fabricação de lajes alveolares protendidas
(Universidade Federal de São Carlos, 2009-08-17)
This work describes the procedures used in the manufacture and assembly of prestressed concrete hollow core slab systems, along with recommendations for presentation and implementation of projects in order to optimize the ...