Buscar
Itens para a visualização no momento 1-10 of 16
Síntese e Caracterização do Poli(PCL-TMC)uretana para utilização como Biomaterial
(Universidade Federal de São Carlos, 2017-03-03)
Among the polymers widely investigated as materials for tissue engineering, polyurethane has its place of prominence, mainly due to the high flexibility and tenacity. The need for devices with certain mechanical properties ...
Adição de resíduo termofixo em matriz de polipropileno reciclado: análise de propriedades térmicas e mecânicas.
(Universidade Federal de São Carlos, 2017-12-15)
The proper disposal of solid waste has driven studies to enable the use of recycled materials and waste. So, in this work were molded composites using raw materials from industrial waste and evaluated several mechanical ...
Preparação e caracterização de filme de PVA/Quitosana/Colágeno visando a aplicação como curativo cutâneo
(Universidade Federal de São Carlos, 2017-06-28)
One of strong associations between polymers as biomaterials are in field of skin reparation. Polymers are utilized for this purpose, some such as poly (vynil alcohol) (PVA) are used due to characteristics such as ...
Comportamento tribológico dos compósitos poliméricos utilizados no anel de atrito do amortecedor torcional de discos de embreagem
(Universidade Federal de São Carlos, 2017-11-18)
The three cylinder motors tend to vibrate more than the conventional four cylinder ones. In this new condition the transmission system and in particular the torsional damper of the clutch disc is subjected to sever wear ...
Influência da laminação assimétrica nas propriedades mecânicas do alumínio AA 1050
(Universidade Federal de São Carlos, 2017-04-27)
Aluminum sheets are produced by rolling followed by annealing. However when submitted to deep drawing earing appears, caused by the plastic anisotropy resulting from the production process. After annealing the main texture ...
Utilização de resíduos de poliuretano expandido na moldagem por injeção de compósito de matriz de polietileno de alta densidade
(Universidade Federal de São Carlos, 2017-04-03)
For a few years now polymeric materials have been ever present around the whole globe. Polyurethane (PU) for example is the sixth most produced polymer globally, generating with that a considerable amount of scrap due to ...
Desenvolvimento de um biossensor amperométrico baseado em uricase oxidase associado com nanopartículas de platina para detecção de ácido úrico
(Universidade Federal de São Carlos, 2017-03-28)
Uric acid is an endogenous substance produced from the metabolism of purines. The concentration of serum uric acid in the human body considered normal is between 0.24 - 0.52 mmol.L-1 . High levels of uric acid in the body ...
Modificação da molhabilidade da celulose por processos subsequentes de ablação e deposição a plasma
(Universidade Federal de São Carlos, 2017-03-14)
Cellulose is a biopolymer available in abundance in nature, which presents very interesting properties mainly for the textile, packaging and paper industry. However, due to its strongly hydrophilic character, resulting ...
Aproveitamento do copolímero ABS reciclado na moldagem de compósitos com fibras de juta e avaliação de propriedades
(Universidade Federal de São Carlos, 2017-03-13)
In a technology-driven society, the increase of electrical and electronic equipment consumption has been a matter of concern in relation to its management, since the expectation is that the quantity of electrical and ...
Produção e caracterização de biochar de palha de cana-de-açúcar (Saccharum sp.)
(Universidade Federal de São Carlos, 2017-10-06)
The aim of this work was to study pyrolysis conditions (thermal degradation in a controlled presence of oxygen) for make biochar is a kind the raw-material used was the sugarcane straw (Saccharum sp.), that is an abundant ...