Listar por asesor "Alcântara, Nelson Guedes de"
Mostrando ítems 1-12 de 12
-
Influência do defeito tipo cunha no comportamento mecânico de juntas de liga de alumínio 2198 soldadas por fricção por ponto (FSpW)
(Universidade Federal de São Carlos, UFSCar, Programa de Pós-Graduação em Ciência e Engenharia de Materiais - PPGCEM, Câmpus São Carlos, 01/02/2015)One of the main considerations in selecting materials to manufacture aircraft structures is related to weight saving [1]. In this context, the promising aluminum-lithium alloys have been receiving special attention in ... -
Efeito dos materiais do backing bar na geometria e dureza de juntas soldadas por FSW em ligas de alumínio 6013 e 2024
(Universidade Federal de São Carlos, UFSCar, Programa de Pós-Graduação em Ciência e Engenharia de Materiais - PPGCEM, , 12/08/2009)Solid-state joining techniques such as Friction Stir Welding (FSW) are a natural choice to produce weld low heat input, limited slight distortion and low microstructural and mechanical degradation. Great effort has currently ... -
Avaliação da qualidade final de juntas dissimilares de ligas de alumínio 2024-6056 e 7075-6056 soldadas por FSW - friction stir welding
(Universidade Federal de São Carlos, UFSCar, Programa de Pós-Graduação em Ciência e Engenharia de Materiais - PPGCEM, , 31/03/2006)The aeronautic industry has been studying the FSW (Friction Stir Welding) process since its development by TWI (The Welding Institute), in 1991. Nowadays it has been used in the airplanes fuselage of the Eclipse Aviation ... -
Process parameters optimization and microstructure evaluation on friction spot-welded aluminum/copper dissimilar joints
(Universidade Federal de São Carlos, UFSCar, Programa de Pós-Graduação em Ciência e Engenharia de Materiais - PPGCEM, Câmpus São Carlos, 17/11/2016)Dissimilar materials welding is a field of increasing interest for a wide range of industrial applications. Specifically, the welding of aluminum alloys with copper has potential applications in the heating, ventilation ... -
Friction surfacing of aluminum alloy 5083-H112 over AA 2024-T3
(Universidade Federal de São Carlos, UFSCar, Programa de Pós-Graduação em Ciência e Engenharia de Materiais - PPGCEM, Câmpus São Carlos, 23/03/2018)Friction surfacing (FS) is an advanced solid-state process in surface modification with increasing applications in reclaiming worn parts, hardfacing and corrosion protection. It is considered a derivation of the friction ... -
Análise das propriedades mecânicas de juntas sobrepostas na liga Al 6181-T4 soldadas por fricção por ponto
(Universidade Federal de São Carlos, UFSCar, Programa de Pós-Graduação em Ciência e Engenharia de Materiais - PPGCEM, , 21/03/2011)Lightweight alloys, originally developed for aeronautic applications, have also shown increasing use in the automotive sector, aiming fuel consumption and reduction of production costs. In addition to this there is the ... -
Soldagem por fricção e mistura (FSW) no aço inoxidável austenítico AISI 304
(Universidade Federal de São Carlos, UFSCar, Programa de Pós-Graduação em Ciência e Engenharia de Materiais - PPGCEM, , 09/04/2013)Stainless steels are an important class of engineering materials with attractive properties such as high mechanical and corrosion resistance and thereby widely used in a variety of industries and environments due to its ... -
Influência de defeitos nas propriedades mecânicas de juntas soldadas por FSW da liga AA6013-T6
(Universidade Federal de São Carlos, UFSCar, Programa de Pós-Graduação em Ciência e Engenharia de Materiais - PPGCEM, , 28/04/2009)In 1991, it was developed a solid state welding process called Friction Stir Welding - FSW, intended to increase the number of applications for the aluminum and its alloys. As every welding process the presence of defects ... -
Estudo do processo de soldagem por fricção por ponto da liga de magnésio AZ31
(Universidade Federal de São Carlos, UFSCar, Programa de Pós-Graduação em Ciência e Engenharia de Materiais - PPGCEM, , 17/08/2012)The great potential of magnesium alloys on reducing structural weight and therefore contributing with energy efficiency of transportation facilities has mainly attracted the automotive and aeronautic industries. The ... -
Investigação microestrutural e estudo das propriedades mecânicas da liga de alumínio AA2139 T3 e T8 soldadas por Friction Stir Welding - FSW
(Universidade Federal de São Carlos, UFSCar, Programa de Pós-Graduação em Ciência e Engenharia de Materiais - PPGCEM, , 17/02/2011)Aluminum alloys have low density and high corrosion resistance, and because of that this alloys are being increasingly used in aircraft industry. However, a downside of this alloys is its weldability in fusion process, ... -
Otimização do processo de soldagem por fricção por ponto (FSpW) de soldas de materiais similares e dissimilares de ligas leves
(Universidade Federal de São Carlos, UFSCar, Programa de Pós-Graduação em Ciência e Engenharia de Materiais - PPGCEM, , 07/08/2014)Currently there is a lot of pressure in the aeronautical and automobilistic transport section in order to reduce the fuel consumption and consequently cost and gas emissions. This measure has increased in the last years ... -
Soldagem por fricção e mistura da liga de alumínio AA2198-T851 em chapas de diferentes espessuras
(Universidade Federal de São Carlos, UFSCar, Programa de Pós-Graduação em Ciência e Engenharia de Materiais - PPGCEM, , 11/12/2012)Friction Stir Welding (FSW) process, conceived in 1991, has been the target of research in the last decades due to the excellent properties presented by its welded joints, favored by the fact of occurrence in the solid ...