Browsing by Subject "3D printing"

Now showing items 1-12 of 12

    • Avaliações e correlações das propriedades reológicas, mecânicas e de cinética de cristalização de polímeros utilizados em processo de impressão 3d por FFF 

      Sanchez, Larissa Cristina (Universidade Federal de São Carlos, UFSCar, Programa de Pós-Graduação em Ciência e Engenharia de Materiais - PPGCEM, Câmpus São Carlos, 03/09/2018)
      Recently there has been an interest increase in the additive manufacturing process (AM), Fused Filament Fabrication (FFF) is one of the most commercially important extrusion-based process. The success of this technology ...

    • Impactos da manufatura aditiva no modelo de negócio 

      Franco, Denise (Universidade Federal de São Carlos, UFSCar, Programa de Pós-Graduação em Engenharia de Produção - PPGEP, Câmpus São Carlos, 10/07/2019)
      A change in consumption has impacted the industrial production, which currently tends to a low volume of production of customized products. Stay competitive in the face of these Fourth Industrial Revolution trends, companies ...

    • Impressão 3D de blocos de biomaterial compósito de PLGA e beta-TCP visando aplicações médicas em enxertos e implantes 

      Schildt, Letícia Ferreira Lacerda (Universidade Federal de São Carlos, UFSCar, Programa de Pós-Graduação de Mestrado Profissional em Química - PPGQ, Câmpus São Carlos, 28/08/2020)
      Musculoskeletal disorders are the most common causes of reduced quality of life in the world. In some situations, very large flaws in the bones prevent them from regenerating naturally, requiring the use of a bone substitute. ...

    • Impressão 3D do PLA para aplicações biomédicas 

      Duarte, Fernando Biancardi (Universidade Federal de São Carlos, UFSCar, , Câmpus São Carlos, 20/04/2022)
      Currently, additive manufacturing (AM) machines, popularly known as 3D printers, can already be found in the most diverse environments around the world, from industrial facilities, homes, offices, service providers, academic ...

    • Propriedades mecânicas e bioativas de PLA, PCL e suas blendas com HA impressas por FFF 

      Shimomura, Kawany Munique Boriolo (Universidade Federal de São Carlos, UFSCar, , Câmpus São Carlos, 16/11/2021)
      Bone repair measures involving surgeries and tissue replacements are increasingly present today, in addition to the progressive advancement of the market for prostheses, implants and technologies that invest in the health ...

    • An analysis of the relationship between additive manufacturing and circular economy 

      Tavares, Thais Moreira (Universidade Federal de São Carlos, UFSCar, Programa de Pós-Graduação em Engenharia de Produção - PPGEP, Câmpus São Carlos, 22/03/2022)
      Additive Manufacturing (AM) is an important technology of Industry 4.0. It allows the fabrication of objects layer by layer in a continuous or incremental way. Circular Economy (CE) aims to improve resource efficiency in ...

    • Desenvolvimento de uma impressora 3D com extrusão de chocolate 

      Ricci, Cristiane Pereira (Universidade Federal de São Carlos, UFSCar, , Câmpus São Carlos, 02/07/2021)
      Additive manufacturing is a manufacturing process that allows obtaining complex shapes and/or with many stages. Therefore, obtaining a solid is a harder and more complex task. Historically, the use of this technique has ...

    • Modelo computacional de descrição de projetos para impressão de biosistemas 

      Francisco, Luiz Angelo Valota (Universidade Federal de São Carlos, UFSCar, Programa de Pós-Graduação em Ciência da Computação - PPGCC, Câmpus São Carlos, 24/03/2016)
      Currently, there are several studies directed to the manufacture of biosystems (biomaterials, living tissues or organs). These studies include several practice areas ranging from virtual representation of an organ or ...

    • Desenvolvimento e caracterização de biocompósitos de blendas TPU/PCL com hidroxiapatita para produção de scaffolds bioativos via impressão 3D 

      Pinto, Leonardo Alves (Universidade Federal de São Carlos, UFSCar, Programa de Pós-Graduação em Ciência e Engenharia de Materiais - PPGCEM, Câmpus São Carlos, 02/08/2022)
      The increasing need for biological tissues to treat defects caused by disease or injury has demanded new solutions to provide functional substitutes that supply tissue shortages and suit the needs of each patient. In this ...

    • Produção de recurso de Tecnologia Assistiva em laboratório público de fabricação digital 

      Matsumura, Giulia Tiemi (Universidade Federal de São Carlos, UFSCar, , Câmpus Sorocaba, 21/03/2023)
      3D printing technology has been shown to be one of the most promising in the field of assistive technology. However, it is still not widely used by the general population due to difficulties in accessing equipment and a ...

    • Impressão 3D para fins de reparo ósseo: uma revisão da literatura 

      Guimarães, Stephany Castor dos Santos (Universidade Federal de São Carlos, UFSCar, , Câmpus São Carlos, 15/02/2024)
      Bone fractures are a common condition that can affect people of all ages, often caused by trauma such as falls or accidents, or by diseases. The bone healing process is highly regulated, involving cells and growth factors. ...

    • Desenvolvimento e caracterização de gel bioativo à base de fibroína da seda/PLDLA/sinvastatina para impressão 3D 

      Antunes, Bianca Sabino Leocádio (Universidade Federal de São Carlos, UFSCar, Programa de Pós-Graduação em Ciência dos Materiais - PPGCM-So, Câmpus Sorocaba, 30/08/2022)
      Bone Tissue Engineering (BOT) has been growing in recent decades as an effective approach for the treatment of large bone defects. Recently, three-dimensional (3D) printing has emerged as a tool to revolutionize the field ...