TCC
Recent Submissions
-
Friction riveting of printed circuit boards (P.C.B.) and aluminum hybrid joints: joint formation analysis and characterization
(Universidade Federal de São Carlos, UFSCar, , Câmpus São Carlos, 14/04/2022)This work addressed the feasibility study of the Friction Riveting joining process on glass-fiber-reinforced epoxy resin laminate sheet (FR4-PCB) and 2024-T351 aluminum alloy rivets by investigating the rivet scale effects, ... -
Caracterização da liga Al-Fe-Cr-Ti obtida por compactação uniaxial a quente e comparação de sua microestrutura e propriedades com amostras produzidas por Fusão Seletiva a Laser
(Universidade Federal de São Carlos, UFSCar, , Câmpus São Carlos, 22/04/2022)Quasicrystalline phase former aluminum-based alloys have been drawing attention due to their characteristics of composite material, with a ductile matrix with quasicrystalline reinforcement of high hardness, showing ... -
Avaliação de aços ao manganês para a indústria automobilística
(Universidade Federal de São Carlos, UFSCar, , Câmpus São Carlos, 22/04/2022)Oil is a source of fuel that has enabled one of the greatest cultural and economic transformations since the period of the first industrial revolution. However, it is also one of the biggest environmental problems, in ... -
Avaliação das ligas da série 6000 para aplicação em chassi de veículos elétricos
(Universidade Federal de São Carlos, UFSCar, , Câmpus São Carlos, 22/04/2022)The emergence and growth of new social concepts leads the industries to make a series of changes to adapt with new user profiles, safety requirements, and environmental awareness. The use of fossil fuels is increasingly ... -
Ligas de Mg aplicadas na indústria automobilística
(Universidade Federal de São Carlos, UFSCar, , Câmpus São Carlos, 19/04/2022)The automotive industry is more and more willing and subjected to deploy new technologies in the market to mitigate environmental impacts, trying to reduce the consumption of fossil and green fuels, and hence impacting on ... -
Avaliação dos efeitos da microadição de NbB na solidificação da liga de alumínio 2017
(Universidade Federal de São Carlos, UFSCar, , Câmpus São Carlos, 22/04/2022)The 2017 alloy, based on the Al-Cu system, is widely applied in the manufacture of structural parts in the aeronautical and automobile industries. In this work, the modification of this alloy through the addition of Nb and ... -
Seleção e aplicação de um novo método de custeio e precificação para o CCDM/UFSCar
(Universidade Federal de São Carlos, UFSCar, , Câmpus São Carlos, 18/11/2021)This research aims to present a new costing and pricing method for CCDM, a laboratory that provides services in the area of materials engineering. A literature review was carried and papers, books and journals on the topic ... -
Estudo dos parâmetros de processo de dobramento de chapas de aço laminado a quente
(Universidade Federal de São Carlos, UFSCar, , Câmpus São Carlos, 22/04/2022)Among the various processes of sheet metal formability, the folding stands out for its simplicity and replicability, being considered a of the most recurrent operations in metal sheets. In addition, mathematical models ... -
Potencialidades da manufatura aditiva
(Universidade Federal de São Carlos, UFSCar, , Câmpus São Carlos, 19/04/2022)Additive manufacturing is an important technology with a potential to innovate the production methods through its characteristics such as sustainability, possibility to print complex parts, customization of the product and ... -
Empreendedorismo e universidade: uma análise das competências empreendedoras em estudantes do curso de engenharia de materiais da UFSCar
(Universidade Federal de São Carlos, UFSCar, , Câmpus São Carlos, 20/04/2022)This research aims to understand the scenario of entrepreneurship among students of the materials engineering course at the Federal University of São Carlos. For this, a bibliographic and empirical research was carried ... -
Uma nova fronteira da revolução industrial 4.0: smart materials
(Universidade Federal de São Carlos, UFSCar, , Câmpus São Carlos, 18/04/2022)Throughout economic and productive development, we went through some revolutions that have changed the course of society and productive means. We are currently undergoing a fourth industrial revolution, which unites physical, ... -
Estudo sobre os métodos de reciclagem e reutilização de baterias de lítio de carros elétricos
(Universidade Federal de São Carlos, UFSCar, , Câmpus São Carlos, 18/04/2022)Electric vehicle (EV), means of transport considered more sustainable to the environment, have become popular around the world in recent years mainly in the United States, Europe and China. For the next decades, the volume ... -
Avaliação de curvas de dureza de aços temperados por indução
(Universidade Federal de São Carlos, UFSCar, , Câmpus São Carlos, 22/04/2022)Surface heat treatment processes via induction heating has been widely used in industries when wear resistance is needed. This process is analyzed in the present work. Some process variables define the hardness layer to ... -
Uso de materiais refratários recuperados em concretos para canais de corrida
(Universidade Federal de São Carlos, UFSCar, , Câmpus São Carlos, 04/04/2022)In order to achieve a sustainable production, in a sector where the demand for natural raw materials is very high worldwide, this project aimed to explore the feasibility of increasing the addition of recovered materials ... -
Impressão 3D do PLA para aplicações biomédicas
(Universidade Federal de São Carlos, UFSCar, , Câmpus São Carlos, 20/04/2022)Currently, additive manufacturing (AM) machines, popularly known as 3D printers, can already be found in the most diverse environments around the world, from industrial facilities, homes, offices, service providers, academic ... -
Reintegração da borracha de pneus inservíveis para construção civil
(Universidade Federal de São Carlos, UFSCar, , Câmpus São Carlos, 17/11/2021)The disposal of tires has been a major social challenge nowadays, which is why, many entities and companies that operate in this sector contribute to combating the incorrect dumping of tires. One of the methods most used ... -
Analise da soldagem a ponto por resistência elétrica do aço 38MnB5 estampado a quente
(Universidade Federal de São Carlos, UFSCar, , Câmpus São Carlos, 12/11/2021)With the increasing demand for lighter and safer vehicles one of the solutions is the use of stronger steels that can be formed by hot stamping and with smaller thicknesses, reducing weight and maintaining safety. The ... -
Estudo da aplicação do SURMOF em componentes eletrônicos utilizados em circuitos digitais
(Universidade Federal de São Carlos, UFSCar, , Câmpus São Carlos, 16/11/2021)Faced with technological advances and the requirement for increasingly stable, more compact and more versatile materials, nanotechnology enables the study and manipulation of materials for the construction of new components ... -
Avaliação do comportamento de corrosão de concretos refratários contendo ZnAl2O4 via simulações termodinâmicas
(Universidade Federal de São Carlos, UFSCar, , Câmpus São Carlos, 18/11/2021)The main characteristic of refractory ceramics is the capacity to withstand thermo-chemicalmechanical stresses at high temperatures for long periods of time, which allows this material to be applied in a diverse industrial ... -
Estado da arte da impressão 4D: conceitualização e perspectivas tecnológicas
(Universidade Federal de São Carlos, UFSCar, , Câmpus São Carlos, 19/11/2021)The present work aimed to draw an overview of the main points related to the state of the art of 4D Printing through the analysis of different literature available on the subject. The origins of the additive manufacturing ...