Análise do ciclo de vida energético de projeto de habitação de interesse social concebido em light steel framing
Carminatti Júnior, Riberto
MetadatosMostrar el registro completo del ítem
The construction industry in Brazil has great importance both socially and economically, but generates more than 50% of municipal solid waste and consuming large quantities of raw materials, energy and water. Thus the sector is strategic under the environmental point of view, since small changes in their processes cause the reduction of environmental impacts. To meet the current housing shortage, many building systems are being employed in the country, among which, the Light Steel Framing (LSF), which consists of a rational building system, and industrial productivity. The aim of this study was to simulate the amount of embodied energy original (EEi) of a standard project aimed at social housing using the LSF as a constructive system, applying the concepts of Life Cycle Analysis of Energy (ACVE). To achieve this goal initially was held to review the literature on sustainability, and LSF construction system ACVE. Following the adjustment was made for a project for social housing in structural masonry designed to LSF. From the specifications for materials and components, their respective values of the quantitative EEi and held the simulation of the quantity of EEi considering three scenarios: project conceived in structural masonry concrete block, masonry, structural ceramic blocks and LSF. Comparing the results of three simulations, it was concluded that the project designed masonry structural ceramic blocks showed the lowest absolute value of the EEi in relation to other systems simulated (117.6 GJ and 3.0 GJ / m² ), with the LSF presented an intermediate value (154.3 GJ and 3.9 GJ / m²), but very close to the masonry of ceramic blocks, while designed masonry concrete blocks had a higher value (262 , 0 GJ and 6.6 GJ / m²), largely due to the high value of IAS adopted for the concrete. It is noteworthy that these results should not be extrapolated as EE values were used for materials and components used in these construction systems referenced in the international literature, which indicates the need to build a national database about.