Show simple item record

dc.contributor.authorBergamaski, Franciele de Oliveira Freitas
dc.date.accessioned2016-06-02T20:34:22Z
dc.date.available2010-11-25
dc.date.available2016-06-02T20:34:22Z
dc.date.issued2010-11-19
dc.identifier.urihttps://repositorio.ufscar.br/handle/ufscar/6173
dc.description.abstractWe have studied the optical properties of Poly(3-Thiopheneacetic Acid) (PTAA) by absorption, emission, and infrared measurements. We have observed, on the contrary of what broadly reported in the literature, that the intensity of the PTAA luminescence increased with time exposition of the Laser beam. The results have been shown that luminescence was highly dependent of the power of Laser beam excitation and of the polymeric (blends) film thickness. To evaluate the chemical changes in the course of luminescence increasing, absorption measurements in the infrared range were done. A decrease in the band of 1560 cm-1 was observed after Laser beam irradiation, what could be related with a decrease in the number of C=C bonds, and it is a possible explanation for the luminescence intensification. The PTAA photoluminescence was studied under high vacuum showing that the increase of luminescence was not dependent of oxygen presence in the polymeric film. Besides, we have done photoluminescence measurements at temperature of 10 K and compared with that at room temperature, 298 K. In the irradiation of the films at 10 K it was observed a suppressing effect that could be related to conformational changes in the polymer structure. Finally, we have measured the time resolved photoluminescence (TRPL) of PTAA and AC/PTAA blends in picoseconds in two temperatures regime. It was investigated the TRPL transients for different samples of PTAA in several solvents and for blends with cellulose acetate (AC) or poly(vinyl alcohol) (PVA). In all samples (the pure polymer and in the blends) the PL transients have presented behavior mono- and biexponentials. However, the mono-exponential model, in most cases, was not sufficient to describe adequately all PL decays. So, it was used a function in the form of two exponentials sum.eng
dc.description.sponsorshipUniversidade Federal de Minas Gerais
dc.formatapplication/pdfpor
dc.languageporpor
dc.publisherUniversidade Federal de São Carlospor
dc.rightsAcesso Abertopor
dc.subjectPolímerospor
dc.subjectFotoluminescênciapor
dc.subjectPolitiofenospor
dc.subjectBlendas poliméricaspor
dc.titlePreparação e caracterização das propriedades luminescentes de blendas de poli(3-ácidotiofenoacético) com acetato de celulose ou poli(vinil álcool)por
dc.title.alternativePreparation and characterization of the luminescent properties from Poly(3-Thiopheneacetic Acid) blends with cellulose acetate or poly(vinyl alcohol)eng
dc.typeTesepor
dc.contributor.advisor1Souza, Ernesto Chaves Pereira de
dc.contributor.advisor1Latteshttp://lattes.cnpq.br/1505400360366643por
dc.description.resumoInicialmente foram estudadas as propriedades ópticas de filmes de Poli(3-ácidotiofenoacético) (PTAA) por medidas de absorção, emissão e infravermelho. Verificou-se, ao contrário do extensivamente descrito na literatura, que a intensidade da luminescência do PTAA aumentava com o tempo de exposição ao Laser. Os resultados mostraram que a luminescência é fortemente dependente da intensidade da luz de excitação e da espessura dos filmes. Para avaliar as mudanças químicas geradas durante o aumento da luminescência, realizaram-se estudos de absorção na região do infravermelho. Observou-se uma diminuição na banda em 1560 cm-1 depois da irradiação com Laser, o que pode estar relacionado com um decréscimo no número de ligações C=C e é uma possível explicação para a intensificação da luminescência. A fotoluminescência do PTAA foi estudada em alto vácuo e os resultados mostraram que o aumento da luminescência é independente da presença de oxigênio. Além disso, com a realização de medidas de fotoluminescência à 10 K, observou-se um efeito supressivo na irradiação dos filmes que pode estar relacionado com a mudança na conformação do polímero. Finalmente, realizaram-se medidas de fotoluminescência resolvida no tempo, PLRT. Foram estudados filmes de PTAA e de blendas AC/PTAA e PVA/PTAA utilizando-se PLRT em picosegundos a temperatura ambiente e a baixa temperatura. Investigaram-se os transientes de PLRT para diferentes amostras de PTAA de diferentes solventes e de blendas com Acetato de celulose (AC) ou Poli(vinil álcool) (PVA). No polímero puro e nas blendas os transientes de PL apresentaram comportamento mono e biexponenciais, entretanto o modelo monoexponencial na maioria dos casos não foi suficiente para descrever adequadamente todos os decaimentos de PL. Utilizou-se então, uma função na forma de uma soma de duas exponenciais.por
dc.publisher.countryBRpor
dc.publisher.initialsUFSCarpor
dc.publisher.programPrograma de Pós-Graduação em Química - PPGQpor
dc.subject.cnpqCIENCIAS EXATAS E DA TERRA::QUIMICA::QUIMICA ORGANICA::POLIMEROS E COLOIDESpor
dc.contributor.authorlatteshttp://lattes.cnpq.br/1192013631012905por


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record