Browsing Teses e dissertações by Title
Now showing items 488-507 of 710
-
Mg-containing multicomponent alloys produced by high-energy ball milling for hydrogen storage
(Universidade Federal de São Carlos, UFSCar, Programa de Pós-Graduação em Ciência e Engenharia de Materiais - PPGCEM, Câmpus São Carlos, 20/02/2020)Hydrogen is a promising energy carrier that allows the use of energy in a sustainable form. However, safe and efficient hydrogen storage is a scientific and technological challenge that still has to be overcome. Recently ... -
Microestrutura e propriedades mecânicas da liga AA6061 processada por deformação plástica severa em temperatura criogênica
(Universidade Federal de São Carlos, UFSCar, Programa de Pós-Graduação em Ciência e Engenharia de Materiais - PPGCEM, Câmpus São Carlos, 08/08/2017)The present work aimed two fronts: to characterize the mechanical behavior of the AA6061 alloy at cryogenic temperature, and to study the microstructural and properties evolution after cryogenic severe plastic deformation. ... -
Microestrutura e propriedades mecânicas de ligas Al-Si hipoeutéticas conformadas por spray.
(Universidade Federal de São Carlos, UFSCar, Programa de Pós-Graduação em Ciência e Engenharia de Materiais - PPGCEM, , 29/06/2005)The aims of this work were the microstructural and tensile properties characterization of the hypoeutectic spray formed Al-Si 319 and 380 alloys. The alloys were melted by induction furnace, gas atomized with nitrogen ... -
Microestrutura e propriedades mecânicas de vitrocerâmicos do sistema Li2O – CaO – SiO2
(Universidade Federal de São Carlos, UFSCar, Programa de Pós-Graduação em Ciência e Engenharia de Materiais - PPGCEM, Câmpus São Carlos, 12/03/2013)An interesting characteristic of the Li2O-CaO-SiO2 glass-forming system is the possibility of obtaining certain crystalline phases and morphologies that may lead to tough glass-ceramics. However, very few published works ... -
Microestrutura, resistência mecânica e corrosão sob tensão em ligas de alumínio Al-0,3%Fe e Al-4%Cu processadas por extrusão em canal angular
(Universidade Federal de São Carlos, UFSCar, Programa de Pós-Graduação em Ciência e Engenharia de Materiais - PPGCEM, Câmpus São Carlos, 29/04/2019)Grain refinement is an important hardening mechanism in metallic alloys, notably when the grain size reaches the submicrometer scale. For this purpose, several techniques of Severe Plastic Deformation (SPD) have been ... -
Microstructure, corrosion, and wear resistance of a boron-modified duplex stainless steel produced by laser powder bed fusion
(Universidade Federal de São Carlos, UFSCar, Programa de Pós-Graduação em Ciência e Engenharia de Materiais - PPGCEM, Câmpus São Carlos, 18/03/2024)A duplex stainless steels (DSS) containing 0.3 and 0.6 wt.% of boron were produced by laser powder bed fusion (L-PBD) with parameters based on Box-Behnken design. The microstructure was evaluated by XRD, OM, SEM, EBSD, ... -
Mineração de textos de patentes para monitoramento tecnológico, identificação de aplicações e seleção de materiais: estudo de caso em desenvolvimentos de aços
(Universidade Federal de São Carlos, UFSCar, Programa de Pós-Graduação em Ciência e Engenharia de Materiais - PPGCEM, Câmpus São Carlos, 26/11/2020)The growing number of options in materials leads to increasing complexity of the process to select the most suitable to perform a function in a product or to choose a competitive application for a newly developed material. ... -
Moagem de alta energia e deformação plástica severa do Mg e do Mg-Fe na síntese de hidretos para armazenagem de hidrogênio
(Universidade Federal de São Carlos, UFSCar, Programa de Pós-Graduação em Ciência e Engenharia de Materiais - PPGCEM, Câmpus São Carlos, 04/03/2017)Magnesium is a light metal with a relatively low cost. It can form magnesium hydride (MgH2), which is interesting for the safe storage of hydrogen in the solid state, thanks to its high gravimetric capacity of 7.6%. The ... -
Modelagem computacional e análise das propriedades termodinâmicas do líquido super-resfriado do sistema Fe-Nb-B
(Universidade Federal de São Carlos, UFSCar, Programa de Pós-Graduação em Ciência e Engenharia de Materiais - PPGCEM, Câmpus São Carlos, 22/04/2019)Amorphous alloys of the Fe-Cr-Nb-B system are promising materials to supply the demand for new pipe coatings of higher wear resistance in the petrochemical industry due to its good abrasion and corrosion resistance properties. ... -
Modelagem termodinâmica computacional de ligas multicomponentes cúbicas de corpo centrado para armazenagem de hidrogênio
(Universidade Federal de São Carlos, UFSCar, Programa de Pós-Graduação em Ciência e Engenharia de Materiais - PPGCEM, Câmpus São Carlos, 20/09/2021)Recently, multicomponent metal alloys for hydrogen storage have drawn attention due to the possibility of exploring a large compositional field, which can allow the control of storage properties by controlling the alloy ... -
Modificação do Poli(hidroxibutirato) PHB com nucleantes e com o copolímero (etileno-co-acetato de vinila) - EVA
(Universidade Federal de São Carlos, UFSCar, Programa de Pós-Graduação em Ciência e Engenharia de Materiais - PPGCEM, , 19/03/2008)In this work, we sought to modify PHB, processing it in the melted state, and to evaluate the effect of the modifications on its mechanical properties and biodegradation characteristics. The following systems were therefore ... -
Modificação e caracterização da superfície do aço inoxidável Martensítico AISI 410
(Universidade Federal de São Carlos, UFSCar, Programa de Pós-Graduação em Ciência e Engenharia de Materiais - PPGCEM, , 29/04/2010)This work deals about the surface modification of the AISI 410 martensitic stainless steel. The modification of steel surfaces is important for the improvement of its mechanical and tribological properties. Among the ... -
Modificação microestrutural da liga Al-Si 380 conformada por spray com a co-injeção de partículas contendo fases intermetálicas
(Universidade Federal de São Carlos, UFSCar, Programa de Pós-Graduação em Ciência e Engenharia de Materiais - PPGCEM, , 19/12/2007)The aim of this work was to determine the microstructure and the mechanical properties of a spray formed Al-Si 380 alloy in different conditions as follow: co-injection of particles containing intermetallic phases, extrusion ... -
Modificação microestrutural da liga de magnésio AZ31 por fricção e mistura a altas velocidades
(Universidade Federal de São Carlos, UFSCar, Programa de Pós-Graduação em Ciência e Engenharia de Materiais - PPGCEM, Câmpus São Carlos, 03/07/2015)Due to the current growth in the fossil fuels consumption, there is a great concern about the increase in pollutant emissions. In order to reduce these emissions, research indicates that the decrease in vehicle weight can ... -
Modificação por nitretação a plasma das superfícies dos aços AISI-4140, AISI-420C e DIN16MnCr5
(Universidade Federal de São Carlos, UFSCar, Programa de Pós-Graduação em Ciência e Engenharia de Materiais - PPGCEM, , 26/05/2011)Plasma nitriding is a surface modification technique used for improving hardness, wear resistance, and fatigue. In this work, samples of AISI-4140, DIN16MnCr, and AISI-420C steels were heat treated, forming martensitic ... -
Modificação química de poli(ácido láctico) com anidrido maleico por processamento reativo
(Universidade Federal de São Carlos, UFSCar, Programa de Pós-Graduação em Ciência e Engenharia de Materiais - PPGCEM, , 18/08/2014)The chemical modification of PLA with maleic anhydride by reactive processing and the extent of reaction and degradation reactions, were studied. Routes of grafting reaction of maleic anhydride in PLA were evaluated. Dicumyl ... -
Modificação química de poli(ácido láctico) com monômeros vinílicos, por processamento reativo, visando ajuste molecular e sua utilização em blendas poliméricas
(Universidade Federal de São Carlos, UFSCar, Programa de Pós-Graduação em Ciência e Engenharia de Materiais - PPGCEM, Câmpus São Carlos, 24/09/2018)Poly(lactic acid) (PLA) was modified with maleic anhydride (MA) or glycidyl methacrylate (GMA) in the presence of peroxide to assess the physical and chemical changes of the polymer during the reactive processing. Chemical ... -
Monitoramento em tempo real da cristalização quiescente e induzida por fluxo de polipropileno em microscópio óptico de luz polarizada
(Universidade Federal de São Carlos, UFSCar, Programa de Pós-Graduação em Ciência e Engenharia de Materiais - PPGCEM, Câmpus São Carlos, 07/08/2015)In the polymer forming processes, such as injection molding, extrusion of films / sheets and blowing, these materials are subject to shearing and elongation flows. Such conditions influence its final morphologies. When ... -
Monitoramento em tempo real da morfologia na extrusão da blenda polimérica polipropileno/ nylon 6.
(Universidade Federal de São Carlos, UFSCar, Programa de Pós-Graduação em Ciência e Engenharia de Materiais - PPGCEM, , 01/09/2006)The aim of this work is to assess in real time the morphological parameters of polypropylene and polyamide 6 blends during the extrusion process. An optical detector based on the visible light transmitted and extinction principle ... -
Monitoramento em tempo real da orientação molecular de poliestireno e em misturas com polimetilmetacrilato durante a extrusão
(Universidade Federal de São Carlos, UFSCar, Programa de Pós-Graduação em Ciência e Engenharia de Materiais - PPGCEM, , 02/03/2011)In this work it was studied the flow orientation of pure polystyrene and its diluted mixtures with polymethylmethacrylate as second phase during extrusion process by in-line monitoring of the polarized transmitted light ...