Navegando Teses e dissertações por data do documento
Itens para a visualização no momento 21-40 of 732
-
Influência das condições de processamento na morfologia e das propriedades mecânicas de sistemas poliméricos moldados por injeção e sua predição através de redes neurais artificiais.
(Universidade Federal de São Carlos, UFSCar, Programa de Pós-Graduação em Ciência e Engenharia de Materiais - PPGCEM, , 12/08/2004)The influence of the injection molding parameters on the morphology and mechanical properties of poly(phenylene sulfide), PPS, and of a 80/20(%wt) blend of PPS/block copolymer styrene-ethylene-butylene-styrene ,SEBS, ... -
Estudos de prevenção da corrosão de refratários utilizados em carro-torpedo
(Universidade Federal de São Carlos, UFSCar, Programa de Pós-Graduação em Ciência e Engenharia de Materiais - PPGCEM, Câmpus São Carlos, 13/08/2004)The high competitiveness generated by the world metallurgical scenery has been taking the Integrated Steelworks to look for an incessant way the increase of the efficiency of the refine pre-treatment processes, especially ... -
Influência dos parâmetros de Processamento e da composição na morfologia de resinas ABS.
(Universidade Federal de São Carlos, UFSCar, Programa de Pós-Graduação em Ciência e Engenharia de Materiais - PPGCEM, , 24/08/2004)The present work is about the influence of processing parameter and composition on the morphology of acrylonitrile-butadiene-styrene (ABS)resins. The ABS grades chosen are commercial products with high rubber content, i. ... -
Desenvolvimento de um novo fundente para substituir o feldspato em composições de grês porcelanato
(Universidade Federal de São Carlos, UFSCar, Programa de Pós-Graduação em Ciência e Engenharia de Materiais - PPGCEM, , 27/08/2004)Amongst the various types of ceramic tiles, the porcelainized stoneware tile stands out due to its technical properties (low water absorption, high mechanical strength and high abrasion, chemical attack and frost resistance). ... -
Degradação da resistência à corrosão de aços inoxidáveis duplex, devido ao envelhecimento em baixas temperaturas por tempos prolongados.
(Universidade Federal de São Carlos, UFSCar, Programa de Pós-Graduação em Ciência e Engenharia de Materiais - PPGCEM, , 30/08/2004)Although duplex stainless steels exhibit good performance in many severe corrosive environments, their corrosion resistance can be hampered by precipitation of chromium (Cr) rich phases during aging heat treatments. Micr ... -
Desenvolvimento e caracterização de composições polipropileno/cargas retardantes de chama.
(Universidade Federal de São Carlos, UFSCar, Programa de Pós-Graduação em Ciência e Engenharia de Materiais - PPGCEM, , 03/09/2004)The main objective of this study was to develop and characterize polypropylene modified with flame retardant fillers. Two flame retardant fillers (Aluminum Hydroxide and Magnesium Hydroxide) were incorporated into four ... -
Grau de cisão de cadeia na degradação termomecânica de polímeros sob multiplas extrusões
(Universidade Federal de São Carlos, UFSCar, Programa de Pós-Graduação em Ciência e Engenharia de Materiais - PPGCEM, , 14/09/2004)One of the ways to follow the polymer degradation has been to calculate the average number of chain scissions (ns) that occurred during its thermomechanical history. The average can be extended for each molecular weight ... -
Síntese e caracterização de nanopartículas de óxido de estanho (SnO2) obtidas a partir de suspensões coloidais.
(Universidade Federal de São Carlos, UFSCar, Programa de Pós-Graduação em Ciência e Engenharia de Materiais - PPGCEM, , 23/09/2004)A novel chemical route was use to obtain colloidal suspensions of SnO2 nanoparticles. The synthesis is based on the hydrolysis reaction of tin chloride (II), and allows the preparation of nanocrystals at room temperature. ... -
Estudo de tendências e oportunidades no desenvolvimento sustentável para a reciclagem de veículos e seus materiais.
(Universidade Federal de São Carlos, UFSCar, Programa de Pós-Graduação em Ciência e Engenharia de Materiais - PPGCEM, , 27/09/2004)The present study has the purpose of identifing and analysing the tendencies of vehicle recycling technologies focusing on shredder residue, PVC and heavy metals due to the importance of this area to the development ... -
Síntese e caracterização de nanofitas de óxido de estanho.
(Universidade Federal de São Carlos, UFSCar, Programa de Pós-Graduação em Ciência e Engenharia de Materiais - PPGCEM, , 08/10/2004)Tin oxide nanoribbons were synthesized by a carbothermal method, which is based on evaporation-condensation reactions. The source material was composed of commercial tin dioxide (SnO2) powders mixed with carbon black. This ... -
Desenvolvimento e caracterização de blendas e de compostos empregando polímeros biodegradáveis
(Universidade Federal de São Carlos, UFSCar, Programa de Pós-Graduação em Ciência e Engenharia de Materiais - PPGCEM, , 25/10/2004)This work presents theoretical information and experimental data on the behavior of biodegradable polymers and blends of biodegradable PHB polymer with copolyesters that are also biodegradable. Binary mixtures were made ... -
Problemas correntes sobre nucleação, crescimento de cristais e difusão em vidros.
(Universidade Federal de São Carlos, UFSCar, Programa de Pós-Graduação em Ciência e Engenharia de Materiais - PPGCEM, , 10/12/2004) -
Efeito da calcinação da magnésia precipitada sobre o processamento de cimentos de fosfato de magnésio.
(Universidade Federal de São Carlos, UFSCar, Programa de Pós-Graduação em Ciência e Engenharia de Materiais - PPGCEM, , 20/12/2004)It is great the interest for materials synthesized at room temperature because they represent an alternative for the current problems of energy. The class of magnesia phosphate cements belongs to this group, being ... -
Inteligência competitiva a tecnologias do carbeto de silício para o setor de abrasivos.
(Universidade Federal de São Carlos, UFSCar, Programa de Pós-Graduação em Ciência e Engenharia de Materiais - PPGCEM, , 04/03/2005)Because the fact we don t have studies about Silicon Carbide ( SiC ) to abrasives in Brasil, this study sought to accomplish the SiC technological search in abrasives using Competitive Intelligence. The necessity to know ... -
Processamento e caracterização da liga Al93Fe3Cr2Ti2 solidificada rapidamente
(Universidade Federal de São Carlos, UFSCar, Programa de Pós-Graduação em Ciência e Engenharia de Materiais - PPGCEM, , 07/03/2005)The necessity to use materials presenting low density, high tensile strength and easy processing ability have led to the development of news materials and news processing techniques. More recently we can find in the ... -
Determinação da energia de fratura em materiais cerâmicos em altas temperaturas.
(Universidade Federal de São Carlos, UFSCar, Programa de Pós-Graduação em Ciência e Engenharia de Materiais - PPGCEM, , 11/03/2005)In this work, the main objective was to determine the energy of fracture in ceramic materials, focused on refractories, at high temperatures and to inquire the interference of the creep on this measurement. Therefore, ... -
Uso do método do trabalho essencial de fratura (EWF) para avaliar a tenacidade de blendas poliméricas.
(Universidade Federal de São Carlos, UFSCar, Programa de Pós-Graduação em Ciência e Engenharia de Materiais - PPGCEM, , 11/03/2005)Initially it was made a well elaborated study on the essential work of fracture method (EWF) using the polyamide 6 (PA6) because this polymer shows high difficult to evaluate its toughness. The PA6 is a semi-crystalline polymer, ... -
Estudo da reação de formação do pigmento cerâmico azul (V-ZrSiO4) a partir de SiO2, ZrO2 e V2O5
(Universidade Federal de São Carlos, UFSCar, Programa de Pós-Graduação em Ciência e Engenharia de Materiais - PPGCEM, , 08/04/2005)The present work aimed to study the process of synthesis of one of the most important ceramic pigments manufactured by the traditional method of oxide mixture: the turquoise blue of vanadium doped zircon. The plan proposed ... -
Utilização de cimento de fosfato de magnésio como ligante na produção de moldes de areia para fundição.
(Universidade Federal de São Carlos, UFSCar, Programa de Pós-Graduação em Ciência e Engenharia de Materiais - PPGCEM, , 13/06/2005)In this study it is discussed the possibility of the application of magnesium phosphate cement as an alternative binder for foundries sand moulds, due to the problem faced for foundries industries during the discard of ... -
Microestrutura e propriedades mecânicas de ligas Al-Si hipoeutéticas conformadas por spray.
(Universidade Federal de São Carlos, UFSCar, Programa de Pós-Graduação em Ciência e Engenharia de Materiais - PPGCEM, , 29/06/2005)The aims of this work were the microstructural and tensile properties characterization of the hypoeutectic spray formed Al-Si 319 and 380 alloys. The alloys were melted by induction furnace, gas atomized with nitrogen ...