Browsing Teses e dissertações by Subject "Engenharia de materiais"
Now showing items 1-20 of 31
-
Laminação em atmosfera inerte de ligas à base de magnésio para armazenagem de hidrogênio
(Universidade Federal de São Carlos, UFSCar, Programa de Pós-Graduação em Ciência e Engenharia de Materiais - PPGCEM, , 08/08/2014)In recent decades, the use of energy presented strong growth due to the need of supplying the daily energy consumption of approximately seven billion people. To solve this problem, it has been investigated the nature, ... -
Highly porous geopolymers: effect of the processing route on the reached properties
(Universidade Federal de São Carlos, UFSCar, Programa de Pós-Graduação em Ciência e Engenharia de Materiais - PPGCEM, , 10/02/2015)Os geopolímeros (polímeros inorgânicos) têm atraído a atenção da academia por várias razões, em particular pelo fato de ser considerado um material sustentável onde subprodutos industriais podem ser utilizados como matéria ... -
Tendência de formação de fase amorfa em ligas a base de magnésio para biomaterial temporário
(Universidade Federal de São Carlos, UFSCar, Programa de Pós-Graduação em Ciência e Engenharia de Materiais - PPGCEM, , 24/10/2011)Mg alloys have attracted attention as potential implant material because of their good mechanical properties, biocompatibility and biodegradation properties. However corrosion of these alloys causes intense release of ... -
Simulação computacional, projeto, construção e análise do desempenho de uma matriz para extrusão em canal angular dedicada ao processamento de chapas
(Universidade Federal de São Carlos, UFSCar, Programa de Pós-Graduação em Ciência e Engenharia de Materiais - PPGCEM, , 29/08/2012)The present work describes the design, construction and testing of an equal channel angular pressing (ECAP) die characterized by rectangular cross section channels. The main parameter of the ECAP dies is the geometry of ... -
Desenvolvimento de um método para levantamento de tecnologias de materiais empregados no trem de força automotivo (powertrain) a partir de patentes
(Universidade Federal de São Carlos, UFSCar, Programa de Pós-Graduação em Ciência e Engenharia de Materiais - PPGCEM, , 27/05/2012)This research approaches the study from patents of technologies for materials used in power train of motor vehicles, to provide additional information in order to support decision making in this universe, especially in the ... -
Ligas metálicas amorfas: um novo método de predição de composição com capacidade de formação de amorfos
(Universidade Federal de São Carlos, UFSCar, Programa de Pós-Graduação em Ciência e Engenharia de Materiais - PPGCEM, , 21/02/2014)This thesis presents the development of a new criterion which can indicate new compositions for amorphous metallic alloys. This new criterion was based on dense packing of spheres combined with the lambda criterion through ... -
Dispositivo óptico para medida em tempo real da birrefringência de polímeros durante a extrusão
(Universidade Federal de São Carlos, UFSCar, Programa de Pós-Graduação em Ciência e Engenharia de Materiais - PPGCEM, , 05/03/2010)The main objectives of this project were the development and application of an optical device to measure in real time the flow induced birefringence during the polymer extrusion. The linearly polarized light intensity ... -
Caracterização das camadas formadas pela nitretação a plasma de ferro sinterizado
(Universidade Federal de São Carlos, UFSCar, Programa de Pós-Graduação em Ciência e Engenharia de Materiais - PPGCEM, , 06/03/2012)Ion nitriding is a process of thermo-physical-chemical treatment that provides a surface hardening, originated by interstitial diffusion of nitrogen on the ferrous and nonferrous alloys surfaces. Understanding and controlling ... -
Influência da nanoargila no envelhecimento higrotérmico de compósitos de polipropileno / PP maleado / fibra de vidro
(Universidade Federal de São Carlos, UFSCar, Programa de Pós-Graduação em Ciência e Engenharia de Materiais - PPGCEM, , 21/05/2010)In short glass fiber (GF) reinforced polypropylene (PP) composites, despite of the chemically inert and non-polar nature of the matrix, the fiber-matrix interfacial integrity may be compromised in a hygrothermal active ... -
Caracterização da fabricação e uso de compósitos poliméricos contendo fibras naturais com ênfase no polipropileno/sisal a partir da análise de documentos de patentes
(Universidade Federal de São Carlos, UFSCar, Programa de Pós-Graduação em Ciência e Engenharia de Materiais - PPGCEM, , 24/01/2012)Natural fibers have became important as substitute for synthetic fiber reinforcement and filling in polymer composites, looking for better properties, lower cost and appeal of sustainability. To do so, there are challenges ... -
Estudo in vitro e in vivo da osseointegração de implantes de titânio com superfícies biomimetizadas
(Universidade Federal de São Carlos, UFSCar, Programa de Pós-Graduação em Ciência e Engenharia de Materiais - PPGCEM, , 30/03/2012)The researchrs conducted with implants are seek to improve the quality of products in order to reduce the waiting time after the surgery to undergo implants on chewing loads safely. To meet this expectation it must be ... -
Obtenção e caracterização elétrica de filmes finos de SnO2:Sb
(Universidade Federal de São Carlos, UFSCar, Programa de Pós-Graduação em Ciência e Engenharia de Materiais - PPGCEM, , 03/03/2011)The growing demand for advanced electronic devices based on nanomaterials has motivated efforts to produce nanoscale building blocks with designed functions. Transparent conducting oxide nanocrystals (TCONs) are particularly ... -
Desenvolvimento de compósito de policloreto de vinila (PVC) reforçado com fibra de vidro
(Universidade Federal de São Carlos, UFSCar, Programa de Pós-Graduação em Ciência e Engenharia de Materiais - PPGCEM, , 06/08/2012)This work was focused on the evaluation of the interface between short fiber glass and polymeric matrix of the PVC composites using four different sizings as fiber superficial treatment. The interface analysis was done ... -
Carvão vegetal: desenvolvimento de indicadores tecnológicos a partir da análise de documentos de patentes
(Universidade Federal de São Carlos, UFSCar, Programa de Pós-Graduação em Ciência e Engenharia de Materiais - PPGCEM, , 30/08/2013)Charcoal is an important renewable source of energy and feedstock for several applications. Its consumption, production and utilization are known by human kind for many years and have been increasing over time. The constant ... -
Estudo de vida em fadiga de parafusos pediculares revestidos com hidroxiapatita
(Universidade Federal de São Carlos, UFSCar, Programa de Pós-Graduação em Ciência e Engenharia de Materiais - PPGCEM, , 30/08/2013)The search for new materials or changes in the manufacture process for the surgical implant companies have been considered one the most challenging issues for the engineering in order to supply high performance products ... -
O uso de um vidro altamente bioativo para conferir bioatividade à superfície do titânio: desenvolvimento de um método para recobrimentos descontínuos
(Universidade Federal de São Carlos, UFSCar, Programa de Pós-Graduação em Ciência e Engenharia de Materiais - PPGCEM, , 15/03/2013)Bioactive glasses - or glass-ceramics, exhibit the largest known bioactivity index due to their osteoinductive property - among others. Theirs bonding to bone is also one of the strongest known, but they have poor mechanical ... -
Caracterização microestrutural e mecânica da liga de Al AA7050 reciclada por conformação por spray e extrusão
(Universidade Federal de São Carlos, UFSCar, Programa de Pós-Graduação em Ciência e Engenharia de Materiais - PPGCEM, , 22/01/2013)Aluminium alloys of the 7000 series are widely used in structural components in the aircraft industries due to their high strength and low density. However, a large amount of scraps is generated by the machining of the ... -
Produção e caracterização de recobrimentos de aço, empregando a liga amorfizável Fe-Cr-Nb-B
(Universidade Federal de São Carlos, UFSCar, Programa de Pós-Graduação em Ciência e Engenharia de Materiais - PPGCEM, , 13/02/2012)The equipments used to oil flow are submitted in an aggressive environment with the presence of hydrogen sulphide, carbon dioxide and sand, which contribute to corrosion and wear of the surface. To resist of these requests ... -
Estudo da cinética de oxidação em altas temperaturas da liga SV15 aplicada na fabricação de sedes de válvulas de escape de motores automotivos
(Universidade Federal de São Carlos, UFSCar, Programa de Pós-Graduação em Ciência e Engenharia de Materiais - PPGCEM, , 14/04/2014)The SV15 alloy is applied in the production of the exhaust valve seats of automotive engines. The conditions of service in which the part is submitted require materials resistant to oxidation because of high temperature ... -
Elaboração e análise de indicadores bibliométricos de publicações na área de educação em engenharia de materiais
(Universidade Federal de São Carlos, UFSCar, Programa de Pós-Graduação em Ciência e Engenharia de Materiais - PPGCEM, Câmpus São Carlos, 08/11/2021)Engineering is directly related to the industrial and socioeconomic development of each country and region in which it operates, being a central area in its development. Indispensable to the present day, the engineering ...