Buscar
Mostrando ítems 31-40 de 78
Propriedades mecânicas de tração e impacto dos aços inoxidáveis CA15 e CA6NM
(Universidade Federal de São Carlos, 2007-02-27)
The subject of this work was to study the mechanical properties, based in tensile and impact tests, of two stainless martensitic steels cast under designations of ASTM Standards, namely the CA15 steel, a steel with 12% of ...
Desenvolvimento de PVC reforçado com fibras de vidro longas para fabricação de produtos moldados
(Universidade Federal de São Carlos, 2009-06-04)
This work presents a method of the long glass fiber reinforced PVC compound through incorporating continuous glass fibers with plasticized vinyl matrix prepared by wire coating process and pelletizing the coated roving (by ...
Dispersão seletiva de argila montmorilonita em blendas poliméricas de PA6/ABS
(Universidade Federal de São Carlos, 2009-08-25)
For some applications toughening of polyamide is important. This can be accomplished through the addition of an elastomeric phase to the polyamide matrix with the drawback of a reduction in the stiffness and strength of ...
Estudo da recristalização dinâmica do aço inoxidável austenítico F 138, utilizado em próteses ortopédicas
(Universidade Federal de São Carlos, 2009-11-15)
In order to analyze the microstructure and to know the dynamic softening mechanics that take place during the hot work in F 138 stainless steel, physical simulation was carried out through continuous isothermal hot torsion ...
Caracterização físico-química de PET ramificado e de suas blendas com PET reciclado
(Universidade Federal de São Carlos, 2004-05-10)
The growing concern with the solid residues management, observed in the last decade, due to its huge amount and impact, has motivated the search for recycling processes, where these residues can be reprocessed to generate ...
Reatividade de materiais de moldagem na fundição de precisão de titânio
(Universidade Federal de São Carlos, 2009-04-13)
Investment casting of Titanium parts free of defects is very difficult owing to the reactivity of this element in the liquid state .The objective of this study was to evaluate the reactivity of titanium with refractory ...
Avaliação eletroquímica de juntas soldadas por fricção radial de aços inoxidáveis supermartensíticos
(Universidade Federal de São Carlos, 2007-03-23)
Supermartensitic stainless steels are used in the oil and gas industry to the construction of line pipes which require welding operations. This process affects the corrosion resistance of the welded joint. Recently, new ...
Estudo das propriedades reológicas de nanocompósitos para a produção de filmes tubulares
(Universidade Federal de São Carlos, 2008-07-08)
In this work, the use of rheological measurements in substitution or complementation to methods normally employed in the characterization of nanocomposites, such as X-ray diffraction (WAXS) and transmission electron ...
Obtenção de estruturas porosas altamente bioativas via sinterização do Biosilicato®
(Universidade Federal de São Carlos, 2009-04-07)
In the present work, scaffolds were obtained through the controlled sintering of Biosilicate®. This material possesses good mechanical properties and its bioactivity level is comparable to that of bioglasses, making it an ...
Processamento, caracterização microestrutural e avaliação das propriedades mecanicas da liga Al92Fe3Cr2Mn3
(Universidade Federal de São Carlos, 2008-09-08)
Aluminum alloys having a particle dispersion in nanometric scale, which present elevated values of mechanical strength at both ambient and high temperatures have been studied for some time. These alloys are known for ...