Search
Now showing items 11-20 of 264
Concretos refratários avançados com alto teor de carbono
(Universidade Federal de São Carlos, 2010-03-12)
Refractory castables in the Al2O3-SiO2-SiC-C system are applied in the iron making process, including runners for molten slags and metals. Over the past years, several attempts to increase the carbon content of these ...
Estudo da influência da camada de engobe sobre a curvatura central de revestimentos cerâmicos
(Universidade Federal de São Carlos, 2011-12-05)
Given the importance of planarity of the tiles for covering of floor and walls, this work aims to identify the influence of engobe layer on the behavior of central curvature, and from then on, allowing a greater understanding ...
Preparação de nanofibras de celulose a partir de fibras de curauá para desenvolvimento de nanocompósitos poliméricos com EVA
(Universidade Federal de São Carlos, 2010-03-10)
The objective of the current project was the obtainment of cellulose nanofibers from curaua fibers and their application on the development of polymeric nanocomposites with EVA. A study of cellulose extraction according ...
Cerâmicas refratárias resinadas: fundamentos, análise crítica e efeito dos agentes grafitizantes e antioxidantes
(Universidade Federal de São Carlos, 2011-08-30)
Improvements on carbon containing refractories are synonymous of benefits for the entire steel industry. In the last years, two particular developments deserve to be highlighted: (i) the report of additives able to graphitize ...
Concretos refratários nanoligados para aplicação em unidades de craqueamento catalítico
(Universidade Federal de São Carlos, 2013-09-24)
In the petrochemical industry gasoline and LPG are produced in the fluid catalytic cracking unit (FCCU). The cracking occurs by the contact of crude oil with fluidized fine particles of a ceramic catalyst. The process ...
Análise comparativa de fadiga mecânica em compósitos de polipropileno com talco e com nanoargila
(Universidade Federal de São Carlos, 2010-05-17)
Talc is a well known lamellar mineral filler much used for mechanical reinforcement of polypropylene (PP) composites. Mineral nanoclay is also a lamellar filler that is gaining much interest due to its reinforcement effect ...
Comportamento térmico e mecânico de resinas termocuráveis para aplicação como revestimento adesivo em fios esmaltados
(Universidade Federal de São Carlos, 2010-04-01)
Selfbonding magnet wires are composed by two or more polymeric cover layers, being the inner layers thermosetting and the over coat composed of a thermoplastic cross-linkable layer. These wires are used in several magnetic ...
Utilização da borracha natural no desenvolvimento de elastômeros termoplásticos
(Universidade Federal de São Carlos, 2010-05-28)
Dynamic vulcanization is a process of vulcanization of an elastomer during melt mixing with a thermoplastic. This process results in an elastomeric alloy material with the properties of a conventional thermoset rubber, but ...
Comportamento mecânico da liga Ti-6Al-4V com superfície modificada por laser de femtosegundo para uso biomédico
(Universidade Federal de São Carlos, 2012-02-10)
Stainless steel orthopedic implants are still the most widely used in Brazil
due to their lower cost. There is, however, a tendency to expand the use of
special alloys such as titanium-based, due to clinical advantages ...
Nanotecnologia: indicadores tecnológicos sobre os avanços em materiais a partir da análise de documentos de patentes
(Universidade Federal de São Carlos, 2011-09-19)
Nanotechnology is a technological advance of several fields, regarded to be emergent, universal and diffuse field, involving mainly the development of nanomaterials, which can show different properties and behaviors. The ...