Buscar
Itens para a visualização no momento 21-30 of 168
Influência da adição de um fundente sintético no mecanismo de coloração final de revestimentos cerâmicos
(Universidade Federal de São Carlos, 2011-08-12)
The presence of iron oxide in ceramic tile mass contributes to the reddish color firing of the products leading to a lower aggregate value, not to be regarded as a "noble" ceramic. However, the use of raw materials with ...
Processamento e caracterização de nano-biocompósitos de Poli(hidroxibutirato-co-hidroxivalerato)/montimorilonita modificada organicamente (PHBV/OMMT) com adição de plastificante
(Universidade Federal de São Carlos, 2010-12-10)
A current search for new materials that are economically viable and ecologically correct has led to the implementation of many studies aimed at improving the properties and processability of biodegradable polymers. This ...
Sinterização, cristalização, desenvolvimento e caracterização de vitrocerâmicas de baixo coeficiente de expansão térmica do sistema Li2O - Al2O3 SiO2 (LAS)
(Universidade Federal de São Carlos, 2010-10-15)
Glass-ceramics based on the Li2O-Al2O3-SiO2 (LAS) system represent the most important (commercial) family. They are required for applications where extreme dimensional stability and thermal shock resistance are of utmost ...
Avaliação do dano por choque térmico em concretos refratários via espectroscopia acústica ressonante não-linear
(Universidade Federal de São Carlos, 2012-03-02)
In this thesis the Non-linear Resonant Acoustic Spectroscopy Technique used to evaluate the mesoscopic non-linearity was incorporated into the Impulse Excitation Technique, which is extensively applied to the evaluation ...
Novas ligas formadoras de fase amorfa do sistema Ni-Nb-Zr e seu comportamento mecânico
(Universidade Federal de São Carlos, 2011-04-15)
Ni-based amorphizable alloys in the bulk form show a good combination of properties, with high mechanical strength and hardness, good ductility and excellent corrosion resistance. These alloys have been used in recent ...
Caracterização da resistência à corrosão de ligas inoxidáveis Fe-Mn-Si-Cr-Ni-(Co) com efeito de memória de forma
(Universidade Federal de São Carlos, 2011-03-03)
In this work, the corrosion behavior of three Fe-Mn-Si-Cr-Ni (Co) shape memory stainless steels (SMSS) in aggressive environments was characterized. The electrochemical corrosion behavior in 0.5 M H2SO4 solution was obtained ...
Synthesis and characterization of CH3NH3SnI3, Mn doped CH3NH3SnI3 and oxygen-deficient TiO2 as visible-light active semiconductors
(Universidade Federal de São Carlos, 2020-02-14)
CH3NH3SnI3 is an environmentally-friendly (lead-free) perovskite whose synthesis depends on SnI2. Some disadvantages of SnI2 include high cost and tin(IV) contamination. Thus, SnSO4 and C16H30O4Sn are presented as cheaper ...
Efeito da adição de Ni na microestrutura bainítica de um novo aço para roscas e cilindros de plastificação de polímeros
(Universidade Federal de São Carlos, 2019-09-02)
Nitriding steels, such as DIN 1.8550, are used in the manufacture of screws and barrels for injection molding machines and plastic extruders. The hardening process of DIN 1.8550 occurs via water or oil quenching followed ...
Deformação da fase dispersa e degradação de blendas poliméricas em extrusora dupla-rosca aberta e fechada
(Universidade Federal de São Carlos, 2011-09-05)
In order to obtain flexibility of the processing in a twin-screw extruder and operate it as an internal mixer, the second phase dispersion and deformation and degradation were analyzed during processing in an open and ...
Monitoramento in/on-line da malaxagem na extrusão: hidrólise e extensão de cadeia do poli(tereftalato de etileno) e fusão do polipropileno
(Universidade Federal de São Carlos, 2020-08-14)
During twin-screw extrusion, understanding and quantifying the behaviour of molten polymers under different conditions is limited by the complex configuration of the equipment. Due to this fact, real-time extrusion monitoring ...