Buscar
Mostrando ítems 1-10 de 15
Estudo da influência da adição de compostos de boro na resistência à oxidação de refratários a base de carbeto de silício-liga de nitreto.
(Universidade Federal de São Carlos, 2004-08-06)
In this work, boron was added in a commercial silicon carbide bonded silicon nitride refractory and its influence has been evaluated. These materials have been used as high temperature structural ceramic due to their ...
Desenvolvimento e caracterização de blendas e de compostos empregando polímeros biodegradáveis
(Universidade Federal de São Carlos, 2004-10-25)
This work presents theoretical information and experimental data on the behavior of biodegradable polymers and blends of biodegradable PHB polymer with copolyesters that are also biodegradable. Binary mixtures were made ...
Caracterização físico-química de PET ramificado e de suas blendas com PET reciclado
(Universidade Federal de São Carlos, 2004-05-10)
The growing concern with the solid residues management, observed in the last decade, due to its huge amount and impact, has motivated the search for recycling processes, where these residues can be reprocessed to generate ...
Síntese e caracterização de nanofitas de óxido de estanho.
(Universidade Federal de São Carlos, 2004-10-08)
Tin oxide nanoribbons were synthesized by a carbothermal method, which is based on evaporation-condensation reactions. The source material was composed of commercial tin dioxide (SnO2) powders mixed with carbon black. This ...
Influência da incorporação de poli(ácido lático) - PLA, de pó de madeira e outros aditivos no comportamento físico-mecânico do poli(hidroxibutirato) - PHB.
(Universidade Federal de São Carlos, 2004-04-30)
Polymeric materials are used today in the most varied sectors and the deleterious effects of their application, particularly in the short-term, have led to increasing environmental concern. On the other hand, innovative ...
Degradação da resistência à corrosão de aços inoxidáveis duplex, devido ao envelhecimento em baixas temperaturas por tempos prolongados.
(Universidade Federal de São Carlos, 2004-08-30)
Although duplex stainless steels exhibit good performance in many severe corrosive environments, their corrosion resistance can be hampered by precipitation of chromium (Cr) rich phases during aging heat treatments.
Micr ...
Influência dos parâmetros de Processamento e da composição na morfologia de resinas ABS.
(Universidade Federal de São Carlos, 2004-08-24)
The present work is about the influence of processing parameter and composition on the morphology of acrylonitrile-butadiene-styrene (ABS)resins. The ABS grades chosen are commercial products with high rubber content, i. ...
Estudo de tendências e oportunidades no desenvolvimento sustentável para a reciclagem de veículos e seus materiais.
(Universidade Federal de São Carlos, 2004-09-27)
The present study has the purpose of identifing and analysing the tendencies of vehicle recycling technologies focusing on shredder residue, PVC and heavy metals due to the importance of this area to the development ...
Grau de cisão de cadeia na degradação termomecânica de polímeros sob multiplas extrusões
(Universidade Federal de São Carlos, 2004-09-14)
One of the ways to follow the polymer degradation has been to calculate the average number of chain scissions (ns) that occurred during its
thermomechanical history. The average can be extended for each molecular weight ...
Síntese e caracterização de nanopartículas de óxido de estanho (SnO2) obtidas a partir de suspensões coloidais.
(Universidade Federal de São Carlos, 2004-09-23)
A novel chemical route was use to obtain colloidal suspensions of SnO2 nanoparticles. The synthesis is based on the hydrolysis reaction of tin chloride (II), and allows the preparation of nanocrystals at room temperature. ...