Search
Now showing items 1-10 of 24
Desenvolvimento de compósitos biodegradáveis a partir de amido termoplástico e fibras vegetais
(Universidade Federal de São Carlos, 2011-09-16)
This project had as main objectives to obtain and to develop new and biodegradable composites from renewable sources using a thermoplastic starch (TPS) matrix reinforced with different amounts of natural fibers, acuri, ...
Tendência de formação de fase amorfa em ligas a base de magnésio para biomaterial temporário
(Universidade Federal de São Carlos, 2011-10-24)
Mg alloys have attracted attention as potential implant material because of their good mechanical properties, biocompatibility and biodegradation properties. However corrosion of these alloys causes intense release of ...
Avaliação do reprocessamento de copolímero SAN através de moldagem por injeção
(Universidade Federal de São Carlos, 2011-06-30)
The main objective of this work was to study the reprocessing of copolymer SAN through injection molding and its influence on the mechanical, thermomechanical and optical behavior of that copolymer. Mechanical properties, ...
Análise das propriedades mecânicas de juntas sobrepostas na liga Al 6181-T4 soldadas por fricção por ponto
(Universidade Federal de São Carlos, 2011-03-21)
Lightweight alloys, originally developed for aeronautic applications, have also shown increasing use in the automotive sector, aiming fuel consumption and reduction of production costs. In addition to this there is the ...
Obtenção e caracterização de nanocompósitos de poli(cloreto de vinila): plastisol com argila
(Universidade Federal de São Carlos, 2011-03-03)
This project aims to study the effect of adding nanoparticles in the plastisol of poly(vinyl chloride) microsuspension. The influence of two different types of nanoclay, sodium montmorillonite and organophilic montmorillonite ...
Análise da influência das condições de mistura por extrusão sobre o comportamento de blendas poliméricas PBT/ABS
(Universidade Federal de São Carlos, 2011-06-09)
At the present work several properties of PBT/ABS blends processed with different extrusion conditions as feed rate, screw speed and profile and die geometry were studied in order to verify how these parameters affect their ...
Obtenção e caracterização elétrica de filmes finos de SnO2:Sb
(Universidade Federal de São Carlos, 2011-03-03)
The growing demand for advanced electronic devices based on nanomaterials has motivated efforts to produce nanoscale building blocks with designed functions. Transparent conducting oxide nanocrystals (TCONs) are particularly ...
Erosimetria a quente: equipamento, adequações e correlações dos valores obtidos com as propriedades de concretos refratários
(Universidade Federal de São Carlos, 2011-05-09)
The erosion wear is a mechanism that results in the removal of material from the surface by erosive particles. In some applications, such as calciners used in the aluminum industry and risers of the petrochemical industry, ...
Desenvolvimento de manta flexível altamente bioativa
(Universidade Federal de São Carlos, 2011-07-29)
Recently, intensive studies have been conducted with biomaterials aiming their application as synthetic grafts for reparation and maintenance of bones, teeth and cartilage tissues that have been damaged or lost due to ...
Deformação em canal angular de uma liga Al-4%Cu: efeito dos mecanismos de endurecimento na resistência mecânica e ductilidade
(Universidade Federal de São Carlos, 2011-03-03)
Internal boundaries hardening and precipitation hardening are two important mechanisms acting in metallic alloys. The former has special relevance when the grain size is reduced ...