Search
Now showing items 1-10 of 15
Desenvolvimento do sensor baseado em eletrólito sólido de β-alumina para monitoramento de enxofre na indústria siderúrgica
(Universidade Federal de São Carlos, 2007-10-26)
Electrochemical sensors provide real time information of chemical
compositions of molten metal. They can be used to improve the control of
various metallurgical processes. One of the most successful and widely ...
Vitrocerâmicas do sistema Li2O - Al2O3 - SiO2 (LAS) via sinterização com cristalização concorrente
(Universidade Federal de São Carlos, 2007-03-02)
LAS (Li2O-Al2O3-SiO2) glasses have been often used to produce glass-
ceramics with near zero thermal expansion coefficient. These glass-ceramics
are very important for applications that require high thermal shock ...
Caracterização e avaliação de filmes metálicos para uso em ultra-alto vácuo
(Universidade Federal de São Carlos, 2007-11-27)
The construction of ultra-high vacuum chambers (UHV) for particle accelerators demands pressure in the range of 10-8 Pa, and this is particularly difficult to achieve in chambers with the length to traverse section rate ...
Avaliação de um critério de equivalência entre dados de tração a quente e fluência em aços
(Universidade Federal de São Carlos, 2007-05-28)
This work was conducted in four stages, the first to understand the phenomena that affect the 2.25Cr-1Mo steel hot tensile in different conditions, observing their behavior in a wide range of temperature and strain rates, ...
Desenvolvimento de eletrodo FGM a base de Ni-zircônia para célula a combustível de sólido óxido
(Universidade Federal de São Carlos, 2007-03-01)
The search for alternatives sources to fossil fuel has stimulated the
technological development of solid oxide fuel cell. Hydrogen is the ideal fuel for
this application. However, due to technical reasons, alternatives ...
Análise da processabilidade de blendas PBT/ABS compatibilizadas in situ com copolímeros acrílicos
(Universidade Federal de São Carlos, 2007-12-14)
Poly(butylene terephthalate)/acrylonitrile-butadiene-styrene (PBT/ABS) blends show high toughness at room temperature, low ductile-brittle transition temperature and stable morphology when compatibilized. The flowability ...
Avaliação eletroquímica de juntas soldadas por fricção radial de aços inoxidáveis supermartensíticos
(Universidade Federal de São Carlos, 2007-03-23)
Supermartensitic stainless steels are used in the oil and gas industry to the construction of line pipes which require welding operations. This process affects the corrosion resistance of the welded joint. Recently, new ...
Avaliação do comportamento eletroquímico de juntas soldadas de aço inoxidável supermartensítico por feixe de elétrons baixo vácuo
(Universidade Federal de São Carlos, 2007-02-28)
The electrochemical evaluation of low vacuum electron beam weldments of supermartensitic stainless steel was carried out in terms of anodic polarization in potentiodynamic regime, intergranular corrosion by double loop ...
Uso de LALLS in-line na extrusão de sistemas poliméricos bifásicos
(Universidade Federal de São Carlos, 2007-07-30)
In-line analysis equipments play an important hole in the study of polymer blends extrusion for supplying dynamic information concerning to the morphology of the dispersed phases, such as aspect ratio and size distribution ...
Propriedades mecânicas de tração e impacto dos aços inoxidáveis CA15 e CA6NM
(Universidade Federal de São Carlos, 2007-02-27)
The subject of this work was to study the mechanical properties, based in tensile and impact tests, of two stainless martensitic steels cast under designations of ASTM Standards, namely the CA15 steel, a steel with 12% of ...