Search
Now showing items 1-10 of 579
Influência de diferentes aditivos nucleantes na morfologia e nas propriedades do polipropileno moldado por injeção
(Universidade Federal de São Carlos, 2018-10-25)
Samples of a polypropylene (PP) homopolymer were nucleated with three different nucleating agents: 1,3:2,4-bis (3,4-dimethylobenzylideno) sorbitol (DMDBS), bis(4-propylbenzylidene) propilsorbitol (propilsorbitol), and ...
Análise da microestrutura, parâmetros térmicos e de propriedades mecânicas na solidificação de ligas com alto teor de cobre Al-(x)%Cu-7%Si
(Universidade Federal de São Carlos, 2019-02-26)
Ternary Al-15%Cu-7%Si and Al-22%Cu-7%Si alloys specimens were obtained by transient directional solidification (DS). This technique is able to provide a very large range of cooling rates and microstructures to be correlated ...
Estudo de elastômeros termoplásticos vulcanizados (TPVs) de borracha natural e polipropileno
(Universidade Federal de São Carlos, 2015-12-21)
Natural rubber (NR) is used for the preparation of several articles in domestic, industrial and automotive worldwide. However, for the NR can be used in these applications it must be vulcanized hindering their recyclability, ...
Aprimoramento de um detector de espalhamento de luz laser em baixo ângulo e seu uso in-line na caracterização morfológica de misturas poliméricas bifásicas
(Universidade Federal de São Carlos, 2019-02-27)
A new prototype of the optical detector based on low angle laser light scattering (LALLS) was developed in order to follow in-line the morphology of polymer blends and composites during processing. For this, light from a ...
Simulação computacional do início da precipitação induzida por deformação durante o processamento termomecânico de um aço microligado ao nióbio em resfriamento contínuo
(Universidade Federal de São Carlos, 2019-03-29)
Improving the steel processing is a major focus of the metallurgical industry because the need of materials and products with lower weight and more strength, in addition to increasingly stringent specifications imposed by ...
Caracterização microestrutural e mecânica da liga AA2024 conformada por spray e processada termomecanicamente
(Universidade Federal de São Carlos, 2019-03-22)
This work aimed to evaluate the possibility of combining spray forming processing with mechanical processing techniques (for instance, extrusion, rotary forging, and equal-channel angular pressing (ECAP)) to be used as ...
Pesquisa em consolidação do fechamento de vazios internos em produtos forjados no aço W.Nr. 1.2738 modificado
(Universidade Federal de São Carlos, 2018-11-23)
During steel ingot solidification, internal voids are expected to be formed in its interior. Such voids, if they stay in the final product after the forging step, will hurt the performance and properties of the final ...
Análise do comportamento mecânico a quente do aço inoxidável super duplex UNS S32760 através de mapas de processamento
(Universidade Federal de São Carlos, 2013-12-19)
The need for materials with higher mechanical and corrosion resistance in corrosive environments, such as in oil extraction in saline media, paper and pressure vessel industry, has led to the use of stainless steel Super ...
Efeito de diferentes rotas de processamento nas propriedades de armazenagem de hidrogênio da liga Mg – 8% p. Fe
(Universidade Federal de São Carlos, 2018-03-02)
Interested in developing new, and less dependent on non-renewable
energy sources, researchers have been looking for different alternatives for
energy systems in the recent years. The “Hydrogen Economy” is an alternativ ...
Microestrutura e propriedades mecânicas de vitrocerâmicos do sistema Li2O – CaO – SiO2
(Universidade Federal de São Carlos, 2013-03-12)
An interesting characteristic of the Li2O-CaO-SiO2 glass-forming system is the possibility of obtaining certain crystalline phases and morphologies that may lead to tough glass-ceramics. However, very few published works ...