Search
Now showing items 1-10 of 42
Sinterização por micro-ondas em uma e em duas etapas de varistores à base de ZnO
(Universidade Federal de São Carlos, 2013-09-30)
This thesis is aimed at one-step microwave sintering at frequencies of 2.45 GHz and 30 GHz and the development of two-step microwave sintering (MW-TSS) at 2.45 GHz of ZnO-based nanostructured semiconductor compositions for ...
Estudos qualitativos das transformações termodinâmicas ocorridas durante o processo pirometalúrgico de recuperação de Pb a partir de PbSO4
(Universidade Federal de São Carlos, 2013-08-01)
This study was carried out in order to gain a qualitative understanding of one of the fundamental processes of pyrometallurgical recovery of Pbfrom the inorganic scraps of lead-acid batteries by the reduction of PbSO4to ...
Desenvolvimento do aço inoxidável supermartensítico resistente ao desgaste por conformação por spray para aplicação em "risers"
(Universidade Federal de São Carlos, 2013-04-24)
The oil exploitation and production in the pre-salt layers in safe, efficient and economically viable way depend on the development of materials that bear the severe conditions found in their applications during their whole ...
A importância da caracterização do módulo de elasticidade e do amortecimento de refratários por técnica dinâmica
(Universidade Federal de São Carlos, 2013-03-08)
This dissertation tries to understand the mechanisms involving damping phenomenon in ceramic refractory materials, using a dynamic technique. Damping proves to be an interesting parameter to analyze thermal shock damage ...
Correlação entre morfologia, percolação elétrica e propriedades mecânicas de compósitos da blenda PLA/PBS com grafite expandido
(Universidade Federal de São Carlos, 2013-12-06)
In recent years, researchers from industry and universities have focused
their interests in polymer nanocomposites, especially in multifunctional
composites. The composites made from nano expanded graphite ( nGE ) ...
Caracterização microestrutural e mecânica da liga de Al AA7050 reciclada por conformação por spray e extrusão
(Universidade Federal de São Carlos, 2013-01-22)
Aluminium alloys of the 7000 series are widely used in structural components in the aircraft industries due to their high strength and low density. However, a large amount of scraps is generated by the machining of the ...
Simulação numérica do forjamento a quente de um aço baixo carbono em matriz fechada acoplado com a evolução microestrutural
(Universidade Federal de São Carlos, 2013-11-22)
Hot closed die forging is the most used process to produce metal parts used in supporting and fixing cable conductors in transmission lines of electric power. In this forming process, the microstructural quality of the ...
Concretos refratários nanoligados para aplicação em unidades de craqueamento catalítico
(Universidade Federal de São Carlos, 2013-09-24)
In the petrochemical industry gasoline and LPG are produced in the fluid catalytic cracking unit (FCCU). The cracking occurs by the contact of crude oil with fluidized fine particles of a ceramic catalyst. The process ...
O uso de um vidro altamente bioativo para conferir bioatividade à superfície do titânio: desenvolvimento de um método para recobrimentos descontínuos
(Universidade Federal de São Carlos, 2013-03-15)
Bioactive glasses - or glass-ceramics, exhibit the largest known bioactivity index due to their osteoinductive property - among others. Theirs bonding to bone is also one of the strongest known, but they have poor mechanical ...
Sistemas nanoestruturados condutores baseados em nanocompósitos poliméricos condutores e mantas eletrofiadas condutoras
(Universidade Federal de São Carlos, 2013-05-10)
In this work its was investigated the influence of the processing on the electrical and dielectric properties of nanostructured polymeric systems obtained by differents techniques. The morphology and structure of the ...